1996 CHEVROLET TAHOE Performance Parts

  1. Rancho RS9000X Remote Reservoir Coil-Over Shock Absorbers feature 9-position adjustable valving that enables you to fine-tune damping performance for a wide range performance situations. You can adjust damping according to the environment and your needs as you see fit both manually or remotely (from the inside of your vehicle). The Remote Coil-Over Shock absorbers are undoubtedly the most cutting-edge absorbers coming from the Rancho engineers with more than 40 years of off-roading experience. The RS9000X comes with spherical ends and specially anodized aluminum reservoir with stainless steel braided nose, as well as an aluminum threaded sleeve/spring retainers, Eibach dual coil springs and a spring slider. Take your on and off-road performance to the next level with the ultimate shock absorbers available on the market today! Do not miss the chance to become a part of the Rancho premium off-roading experience today!

    Fitment:

    1996 CHEVROLET TAHOE 5.7L V8 GAS, 6.5L V8 Diesel / Rear Wheel Drive

    $125.12
  2. Fitment:

    1996 CHEVROLET TAHOE LS, LT / 5.7L V8 GAS

    $594.25
  3. Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / 4 doors / Center/Center / 3.00" / 3.00"

    $241.54
  4. Key Features:
    • Load Controller II On-Board Air Compressor Control System
    • Dual Gauge

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT

    $418.87
  5. Fabtech Block and U-Bolt Kits are precision engineered for sheer performance and functionality. All Fabtech components, Including the Block and U-Bolt kits, are tested to outperform all other high quality Suspension components on the market. These super-duty kits are backed by a limited 90 day warranty.

    Fitment:

    1996 CHEVROLET TAHOE Rear Wheel Drive

  6. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    1996 CHEVROLET TAHOE 4 Wheel Drive

  7. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    1996 CHEVROLET TAHOE 4 Wheel Drive, Rear Wheel Drive / With Front Coil Springs

  8. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel

  9. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / Rear Wheel Drive

  10. Key Features:
    • ES3000 Shock Absorber
    • Travel Length 14.71 in.
    • Collapsed Length 9.56 in.
    • Travel Length 5.15 in.

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / Rear Wheel Drive

  11. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel

  12. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / 4 Wheel Drive

  13. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / 4 Wheel Drive

  14. Key Features:
    • Single Steering Stabilizer Kit
    • Complete
    • Incl. Shock Cylinder
    • Bracket
    • w/o Stock Mounts
    • 0 - 2 in. Lift
    • Front

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / 4 Wheel Drive

  15. Key Features:
    • Lateral Traction Bar
    • Mounting Kit Required for Installation

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel / 4 Wheel Drive

    $408.24
  16. Key Features:
    • Suspension Component Box
    • For 4 in. Lift
    • Box 2
    • For PN[K1049B/K1053B]

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS / 4 Wheel Drive / 6 Lug Wheel

    $702.58
  17. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel

  18. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel

    $338.95
  19. Do you look for a quick and affordable solution to improve the performance of your automatic transmission? The B&M Transpak kits are the perfect answer as they will allow you to easily calibrate your shift feel to be firmer, reduce slippage and shift overlap. The Transpak will also significantly reduce overall wear and comes with everything you need to calibrate your transmission for a firmer feel. These kits will allow you to retain full automatic features when in "Drive". Plus, it is backed by a 1 year limited warranty to guarantee your investment!

    Fitment:

    1996 CHEVROLET TAHOE BASE, LS, LT / 5.7L V8 GAS, 6.5L V8 Diesel

    $149.95
  20. Key Features:
    • Axle U-Bolt
    • Rear

    Fitment:

    1996 CHEVROLET TAHOE 5.7L V8 GAS, 6.5L V8 Diesel / 4 Wheel Drive