1986 PONTIAC BONNEVILLE Brands

  1. Key Features:
    • Victor-Link By Cloyes Timing Chain Set
    • Incl. Cam/Crank Sprocket/Chain
    • Chevy Small Block

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $177.34
  2. Key Features:
    • Victor Series Circle Track Water Pump
    • 3/8 in. NPT Aux Fitting
    • 45deg. To Block
    • 0.75 in. Pilot Shaft
    • Dimension From Block Surface To Hub 5.8125 in.
    • 55-95 SB Chevy

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $353.39
  3. Key Features:
    • Performer-Plus Cam Kits Replacement Lifters
    • 16 pc.

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $137.27
  4. Key Features:
    • Rollin Thunder Hydraulic Roller Camshaft Kit
    • Incl. Camshaft PN[2208]/Hydraulic Roller Lifters/Pushrods

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $1,517.95
  5. Key Features:
    • Rollin Thunder Hydraulic Roller Lifter Kit
    • Hydraulic
    • Adv. Duration 280 In/290 Exh
    • V. Lift 0.462 In/0.479 Exh
    • Lobe Angle 107 deg.
    • Incl. Cam PN[2209]/Lifters/Pushrods

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $1,065.95
  6. Key Features:
    • Performer Air-Gap Series Intake Manifold
    • Polished Finish
    • 55-86 Chevy Small Block 262-400 cid
    • For 4 bbl Carbs
    • Non-EGR
    • Idle-5500rpm

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $674.95
  7. Key Features:
    • Performer EPS Intake Manifold
    • Black
    • Non-EGR
    • Idle-5500rpm
    • w/Oil Fill Tube/Breather

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $445.95
  8. Key Features:
    • Intake Manifold Gasket Set
    • Port 1.28x2.09 in.
    • 0.060 in. Thickness
    • 10 pc.

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $244.95
  9. Key Features:
    • RPM Air Gap Intake Manifold
    • Polished Finish
    • Non-EGR
    • 1500-6500rpm
    • 4 bbl Carbs
    • For Square-Bore Carbs
    • Street/Hi Perf. Use Only

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $713.95
  10. Key Features:
    • Hydraulic Roller Lifter Kit
    • Retro Fit
    • 16 pc.

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $959.95
  11. Key Features:
    • Valve Cover
    • Black Finish
    • w/Oil Fill Hole
    • Classic
    • 3.5 in. Height
    • Pair

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $376.03
  12. Key Features:
    • Performer Series Carb
    • 600cfm
    • Sq Flange
    • Manual Choke
    • w/o EGR
    • Black Finish
    • Incl. Timed And Full Vacuum Ports/Metering Jets/Metering Rods/Step Up Spring

    Fitment:

    1986 PONTIAC BONNEVILLE 5.0L V8 GAS

    $492.95
  13. Key Features:
    • Disc Brake Pad
    • SuperDuty w/0.594 Thickness

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $120.89
  14. Key Features:
    • Disc Brake Pad
    • Blue 9012 w/0.594 Thickness

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $124.19
  15. Key Features:
    • Disc Brake Pad
    • DTC-30 w/0.594 Thickness

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $134.09
  16. Key Features:
    • Disc Brake Pad
    • HT-10 w/0.594 Thickness

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $160.19
  17. B&M Governor Recalibration Kit allows you to easily recalibrate the shift points of your transmission after you install it. The readjustment is possible through the governor cover located on the side of your transmission and takes no longer than a couple of minutes. This kit is ideal for effortless transmission swaps on lightweight vehicles and vehicles with low rear gear cargo. It comes packaged with an O-ring, a gasket, weights, springs and all other required hardware. Please keep in mind that this kit is not legal for use on emission controlled vehicles.

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $102.95
  18. B&M Transkit is the ultimate transmission kit developed to fit specific vehicles. The 70226 Transkit is designed for GM 4L80E Transmissions to greatly improve their shifting performance. This comprehensive B&M shift improver kit includes all required parts to fine tune your automatic transmission to BM specifications. The package comes with complete instructions and comes with full manufacturer warranty.

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

    $147.95
  19. B&M Shift Improver Kits offer you a quick and affordable way to improve the performance on any stock automatic transmission. The kits eliminate shift overlap and excess wear on clutches and band. You will be able to chose between two stages to fit your individual needs: an RV/Towing stage and a Street/Strip stage.

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 3.8L V6 GAS, 4.3L V6 GAS, 5.0L V8 GAS

  20. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1986 PONTIAC BONNEVILLE BASE, Brougham, LE / 4.3L V6 GAS, 5.0L V8 GAS

    $402.95