1982 DODGE RAMCHARGER Brands

    • Ring And Pinion Gear Set

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    $383.89
    • Ring And Pinion Gear Set
    • Dana 44
    • 3.73 Ratio
    • 26 Spline Pinion
    • Standard Rotation
    • Fits 3 Series Carrier

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    $383.89
    • Ring And Pinion Gear Set
    • Dana 44
    • 4.88 Ratio
    • 26 Spline Pinion
    • Thick
    • Standard Rotation
    • Fits 3 Series Carrier
    • Double Drilled Ring Gear For 3/8 in. And 7/16 in. Bolts

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    $396.89
    • Ring And Pinion Gear Set
    • Dana 44
    • 5.13 Ratio
    • 26 Spline Pinion
    • Thick
    • Standard Rotation
    • Fits 3 Series Carrier
    • Double Drilled Ring Gear For 3/8 in. And 7/16 in. Bolts

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    $455.89
    • Axle Shaft
    • Dana 44
    • AMC 20
    • 30 Spline
    • 18.3 in. Length
    • Position: Inner

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    $209.89
    • Rear Block Kit
    • Rear Lift: 2"
    • Block Material: Cast Iron
    • U-Bolts Included: Yes
    • Quantity: Sold as a Kit

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    • Position: Rear
    • Rear Lift Height: 1"-2"
    • Center Pin Included: Yes
    • Quantity: Sold as a Kit

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    • Series: Shadow
    • Position: Front Driver Or Passenger Side
    • Upper Mount: Eyelet
    • Lower Mount: Eyelet
    • Extended Length: 26.07"
    • Collapsed Length: 15.7"
    • Quantity: Sold Individually

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    • Series: Shadow
    • Position: Front Driver Or Passenger Side
    • Upper Mount: Eyelet
    • Lower Mount: Eyelet
    • Extended Length: 21.57"
    • Collapsed Length: 13.32"
    • Quantity: Sold Individually

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS / 4 Wheel Drive

    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16 UNF-2B

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS

    • Air Filter Color: Red
    • Air Filter Shape: Round

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8 GAS

    • Position: Front And Rear
    • Front Lift Height: 6"
    • Rear Lift Height: 6"
    • Front Leaf Springs
    • Leaf Spring Bushings
    • Bushing Sleeves
    • U-Bolts
    • With Front And Rear ADX 2.0 Adventure Series Remote Reservoir Monotube Shocks

    Fitment:

    1982 DODGE RAMCHARGER BASE, Royal SE / 5.2L V8 GAS / 4 Wheel Drive

    $1,632.77
    • Position: Front And Rear
    • Front Lift Height: 8"
    • Rear Lift Height: 8"
    • Front Leaf Springs
    • Leaf Spring Bushings
    • Bushing Sleeves
    • U-Bolts
    • With Front And Rear ADX 2.0 Adventure Series Remote Reservoir Monotube Shocks

    Fitment:

    1982 DODGE RAMCHARGER BASE, Royal SE / 5.2L V8 GAS / 4 Wheel Drive

    $1,882.79
  1. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1982 DODGE RAMCHARGER ALL / 4 Wheel Drive

  2. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1982 DODGE RAMCHARGER ALL / 4 Wheel Drive

    • Style: Spin-On Lube Filter
    • Service: Lube
    • Type: Full Flow
    • Media: Enhanced Cellulose
    • Height: 4.338(110)*
    • Outer Diameter Top: 3.66(93)*
    • Outer Diameter Bottom: Closed:
    • Thread Size: 3/4-16
    • By-Pass Valve Setting-PSI: 8-11
    • Anti-Drain Back Valve: Yes
    • Beta Ratio: 2/20=6/20
    • Burst Pressure-PSI: 275
    • Max Flow Rate: 7-9 GPM
    • Nominal Micron Rating: 21

    Fitment:

    1982 DODGE RAMCHARGER 5.2L V8

  3. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1982 DODGE RAMCHARGER BASE, Royal SE / 5.2L V8 GAS

    $276.95
  4. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1982 DODGE RAMCHARGER BASE, Royal SE / 5.2L V8 GAS

    • Suspension Enhancement System
    • Weight Capacity 3000 lbs.
    • Rear

    Fitment:

    1982 DODGE RAMCHARGER

    $269.36
  5. The award-winning Hurst Quarter Stick Shifters are developed to give positive gear change control, and are perfect for street or racing transmission applications. They are designed for two, three, and four-speed automatic transmissions in forward and reverse valve body shift patterns. These cool looking shifters come with a chrome-plated trigger that is specially contoured to fit comfortably into the driver's hand. What's more, they are extremely compact and lightweight to allow for a perfect fit cockpit installation. The Quarter Stick Shifters come with factory installed neutral safety switch, a controlled gate stop activation for positive feel, and one-hand operated, spring loaded reverse Lock/Out mechanism. This mechanism allow for easily clearing the reverse Lock/Out while remaining strapped in their shoulder harness belts. The Quarter Stick Shifters come complete with all necessary hardware, a 5' long shifter cable, and easy to follow installation guide!

    Fitment:

    1982 DODGE RAMCHARGER BASE, Royal SE / 5.2L V8 GAS

    $409.95