1980 CHEVROLET CAMARO Brands

  1. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1980 CHEVROLET CAMARO BASE, BERLINETTA, RALLY SPORT, Z28 / 3.8L V6 GAS, 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $471.95
  2. Key Features:
    • Custom Fit Spark Plug Wire Set
    • Spiral Core
    • 8.8mm
    • Yellow Wire w/Red Boots
    • Male Tower Dist. Cap/HEI Boots

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $122.95
  3. Key Features:
    • Electric Water Pump
    • Aluminum
    • 35 gpm.
    • Black Finish
    • Incl. Wiring Harness
    • Mounting Gaskets/Hardware

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $249.95
  4. Key Features:
    • Water Pump
    • Long Style
    • Iron - Natural Finish
    • High Flow
    • .625 in. Pulley Pilot
    • Standard Rotation
    • Limited 90 Day Warranty

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $103.95
  5. Key Features:
    • Water Pump
    • Long Style
    • Aluminum - Natural Finish
    • High Flow
    • .625 in. Pulley Pilot
    • Standard Rotation
    • Limited 90 Day Warranty

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $147.66
    • Dual Energy 203/212 Hydraulic Flat Cam for Chevrolet Small Block

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8, 5.0L V8, 5.7L V8

    $236.88
    • Chrono Direct-Fit Dash Kit
    • 6 pc.
    • Tach/Speedo/Fuel/OilP/Wtmp/Volt
    • 8K RPM/160 MPH/100PSI/100-250 Deg F/8-18V/0-280 Ohms

    Fitment:

    1980 CHEVROLET CAMARO

    $1,278.66
    • DPI: 162
    • Outlet: 1 9/16"
    • Inlet: 1 5/16"
    • Core Length: 26 1/2"
    • Core Height: 17"
    • Core Thickness: 1 7/8"

    Fitment:

    1980 CHEVROLET CAMARO

    $208.98
    • Fastener Style: Bolt
    • Undercut Stud: No
    • Head Style: Hex
    • Fastener Material: Chromoly
    • Fastener Color: Black oxide
    • Washers Included: Yes
    • Washer Style: Flat
    • Quantity: Sold as a kit

    Fitment:

    1980 CHEVROLET CAMARO 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $116.96
    • Pro-Flo 4 Fuel Injection Kit
    • Plus
    • Crank Reluctor DBW

    Fitment:

    1980 CHEVROLET CAMARO 3.8L V6 GAS, 4.4L V8 GAS, 5.0L V8 GAS, 5.7L V8 GAS

    $1,805.02
    • LS Engine Swap Oil Pan & Remote Single Oil Filter Base Combo Kit
    • Horizontal Port Single Filter Base
    • Red Oil Pan (5qt.)
    • Baffled: No
    • Pan Capacity: 5 Qts.
    • Color: Red
    • Depth: 2" at Front of Sump
    • 6" at Rear
    • Length: 7"
    • Width: 8.25"
    • Material: Steel Pan/Cast Aluminum Filtration
    • Sump Style: Wet Sump
    • Location: Rear

    Fitment:

    1980 CHEVROLET CAMARO

    $594.07
    • LS Engine Swap Oil Pan & Remote Single Oil Filter Base Combo Kit
    • Horizontal Port Single Filter Base
    • Black Oil Pan (7qt.)
    • Baffled: Yes
    • Pan Capacity: 7 Qts.
    • Color: Black
    • Depth: 6" at Rear Sump
    • Length: 8.375"
    • Width: 10.375"
    • Material: Steel Pan/Cast Aluminum Filtration
    • Sump Style: Wet Sump
    • Location: Rear

    Fitment:

    1980 CHEVROLET CAMARO

    $600.70
    • LS Engine Swap Oil Pan & Remote Double Oil Filter Base Combo Kit
    • Horizontal Port Dual Filter Base
    • Chrome Oil Pan (7qt.)
    • Baffled: Yes
    • Pan Capacity: 7 Qts.
    • Color: Chrome
    • Depth: 6" at Rear Sump
    • Length: 8.375"
    • Width: 10.375"
    • Material: Steel Pan/Cast Aluminum Filtration
    • Sump Style: Wet Sump
    • Location: Rear

    Fitment:

    1980 CHEVROLET CAMARO

    $634.08
    • Inlet Diameter: 2.5"
    • Outlet Diameter: 2.5"
    • Configuration: Direct Fit
    • CARB (California) Compliant: Yes
    • CARB EO#: D-193-150
    • Air Tube Adaptable: Yes
    • Body Shape: Oval
    • Body Length: 12"
    • Body Width: 7"
    • Body Height: 3.75"
    • Inlet Connection Type: Clamp-On
    • Outlet Connection Type: Bolt-On
    • Body Material: Stainless Steel
    • Quantity: Sold Individually

    Fitment:

    1980 CHEVROLET CAMARO BASE, BERLINETTA, RALLY SPORT / 4.4L V8 GAS / 2.50" / 2.50"

    $913.00
  6. Key Features:
    • U-Groove Copper Spark Plug
    • 14mm Thread
    • .460 in. Reach
    • Heat Range 6
    • 8 Pack Of PN[0576]

    Fitment:

    1980 CHEVROLET CAMARO 5.0L V8 GAS, 5.7L V8 GAS

  7. Fitment:

    1980 CHEVROLET CAMARO 5.0L V8 / Center/Center / 2.50" / 2.50"

    $149.99
  8. Fitment:

    1980 CHEVROLET CAMARO 5.0L V8 / Center/Center / 3.00" / 3.00"

    $169.99
  9. Fitment:

    1980 CHEVROLET CAMARO 5.0L V8 / Center/Center / 2.50" / 2.50"

  10. Key Features:
    • U-Groove Copper Spark Plug
    • 14mm Thread
    • .460 in. Reach
    • Heat Range 6
    • Each

    Fitment:

    1980 CHEVROLET CAMARO 5.0L V8 GAS, 5.7L V8 GAS

    • Exhaust Header
    • Series: Afterburner
    • Header Style: Long Tube
    • Primary Tube Diameter: 1.63"
    • Collector Diameter: 3.00"
    • Material: Mild Steel

    Fitment:

    1980 CHEVROLET CAMARO BASE, BERLINETTA, RALLY SPORT, Z28 / 5.0L V8 GAS, 5.7L V8 GAS

    $518.95