1958 JEEP FC150 Crown Automotive

    • Brake Master Cylinder Washer
    • Inner
    • Located Between Master Cylinder and Y-Fitting

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

    • Brake Master Cylinder Washer
    • Outer
    • Located Between Bolt And Y-Fitting
    • Copper

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  1. Key Features:
    • Axle Shaft Seal
    • Rear Left Or Rear Right
    • Outer
    • Incl. 2 Gaskets/1 Seal

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  2. Key Features:
    • Brake Spring
    • For Use w/11 in. Brakes
    • Upper
    • Front Or Rear

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  3. Key Features:
    • Crankshaft Packing
    • Rear

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  4. Key Features:
    • Crankshaft Pulley
    • Double Groove

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  5. Key Features:
    • Generator Support Bolt

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  6. Key Features:
    • Generator Support Bushing
    • 4 Required
    • For Use w/PN[JA001395]

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  7. Key Features:
    • Limited Slip Differential Fluid Additive
    • 4 oz. Bottle
    • 36 Bottles Per Case

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  8. Key Features:
    • Pinion Washer

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  9. Key Features:
    • Point Set

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  10. Key Features:
    • Manual Trans Snap Ring
    • T85 - Input Shaft Snap Ring
    • T86 Or T90 - 2nd And 3rd Gear Synchronizer Snap Ring

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  11. Key Features:
    • Thermostat
    • Gasket Sold Separately

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  12. Key Features:
    • Tie Rod Adjusting Tube Clamp

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  13. Key Features:
    • Manual Trans Cluster Gear Thrust Washer
    • Rear
    • Bronze Backed w/o Lip

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  14. Key Features:
    • Transfer Case Input Shaft Bearing
    • 14 Required

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  15. Key Features:
    • Knuckle Seal Retaining Plate
    • Front Left Or Front Right
    • 2 Required Per Side

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  16. Key Features:
    • Leaf Spring Bushing
    • Front Or Rear
    • Varies With Application
    • Left Or Right
    • Bushing Eye For Pivot End of Spring
    • 3/4 in. Diameter
    • 1-5/8 in. Long

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS

  17. Key Features:
    • Differential Pinion Bearing Cup
    • Inner
    • w/Dana 53 Rear Axle

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS

  18. Key Features:
    • Steering Tie Rod End
    • Left Or Right
    • Varies With Application
    • 3 1/8 in. Long
    • LH Thread

    Fitment:

    1958 JEEP FC150 2.2L L4 GAS, 3.7L L6 GAS