Flowtech 32100FLT - Ceramic Headers

Part #32100FLT

Flowtech 32100FLT - Ceramic Headers

Part #32100FLT
$445.95
Buy now and save $44.60
$490.55
Free Shipping
Fitment Guaranteed
No Border Fees
Lowest Price Guaranteed
Authorized Dealer
Tax Free Ordering

Product Info

Flowtech Brand Banner - US

Flowtech 32100FLT - Ceramic Headers

Flowtech Headers are engineered to get maximum performance and fuel economy from your engine. Each header is formed specially selected .049 cold roll flash controlled tubing, and is available with Flowtech thick, mandrel-formed Power Plenum collector. All ports are precisely fitted and finished with sturdy, leak-proof O-ringed port seals. They come packaged with all mounting hardware including bolts, nuts, and are available with satin black finishing or with a specially formulated, silver luster ceramic coating for rust and corrosion resistance. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty.

Key Features:
  • Ceramic Header
  • Primary Tube Coll. Size 1.5x3 in.
  • Can Be Modified To Fit A.I.R. Fittings In Head
  • Will Not Fit C6 Trans.
Note: Automotive Stuff is an authorized dealer of all Flowtech products, so your new product will include the full factory warranty.

Flowtech Brand Banner - about

Flowtech Performance Exhaust was founded in 1994, by Gary Biggs - exhaust market expert, and became the leader in value priced exhaust systems in less than two decades. In 1999 Flowtech joined Holley Performance Products.

Description

Key Features:
  • Ceramic Header
  • Primary Tube Coll. Size 1.5x3 in.
  • Can Be Modified To Fit A.I.R. Fittings In Head
  • Will Not Fit C6 Trans.

Vehicle Fitment

Year Make Model Submodel Engine Size Transmission Type
1967 FORD FAIRLANE 500, 500XL, BASE 4.7L V8 GAS Automatic Trans
1968 - 1969 FORD FAIRLANE 500, BASE 5.0L V8 GAS Automatic Trans
1966 - 1967 FORD FALCON BASE, FUTURA 4.7L V8 GAS N/A
1969 FORD MUSTANG BASE 5.8L V8 GAS Automatic Trans
1970 FORD MUSTANG BASE, GRANDE, MACH 1 5.8L V8 GAS Automatic Trans
1971 - 1973 FORD MUSTANG BASE, GRANDE, MACH 1 5.0L V8 GAS, 5.8L V8 GAS Automatic Trans
1966 - 1967 FORD RANCHERO BASE 4.7L V8 GAS Automatic Trans
1968 - 1969 FORD RANCHERO BASE, GT 5.0L V8 GAS Automatic Trans
1970 - 1971 FORD RANCHERO 500, BASE, GT, SQUIRE 5.0L V8 GAS Automatic Trans
1972 - 1973 FORD RANCHERO 500, GT, SQUIRE 5.0L V8 GAS Automatic Trans
1968 FORD TORINO BASE, GT 5.0L V8 GAS Automatic Trans
1969 FORD TORINO BASE, GT, SQUIRE 5.0L V8 GAS Automatic Trans
1970 FORD TORINO BASE, Brougham, GT, SQUIRE 5.0L V8 GAS Automatic Trans
1971 FORD TORINO 500, BASE, Brougham, GT, SQUIRE 5.0L V8 GAS Automatic Trans
1972 - 1973 FORD TORINO BASE 5.0L V8 GAS Automatic Trans
1966 - 1967 MERCURY COMET BASE 4.7L V8 GAS N/A
1968 - 1969 MERCURY COMET BASE 5.0L V8 GAS N/A
1971 - 1973 MERCURY COMET BASE 5.0L V8 GAS N/A
1969 - 1970 MERCURY COUGAR BASE, XR-7 5.8L V8 GAS Automatic Trans
1971 - 1973 MERCURY COUGAR BASE, XR-7 5.8L V8 GAS N/A
1968 MERCURY CYCLONE BASE 5.0L V8 GAS N/A
1969 MERCURY CYCLONE BASE, CJ 5.0L V8 GAS N/A
1970 MERCURY CYCLONE GT 5.0L V8 GAS N/A
1968 - 1969 MERCURY MONTEGO BASE, MX 5.0L V8 GAS N/A
1970 - 1971 MERCURY MONTEGO BASE, MX, MX Brougham, Villager 5.0L V8 GAS N/A
1972 - 1973 MERCURY MONTEGO BASE, GT, MX, MX Brougham, Villager 5.0L V8 GAS N/A

Reviews

Write a Review

Submit a review for: Flowtech 32100FLT - Ceramic Headers

Rating: