2005 CHEVROLET SSR Suspension Systems

Results Per Page:

1-20 of 23 Results

1-20 of 23 Results
  1. Key Features:
    • Pro Series Helper Springs
    • 2500 lbs. Capacity

    Fitment:

    2005 CHEVROLET SSR BASE / 6.0L V8 GAS

    $454.86
  2. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL / Rear Wheel Drive

  3. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL

  4. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL / Rear Wheel Drive / Front

  5. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL / Rear Wheel Drive

  6. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL / Rear Wheel Drive

  7. KYB Spring Seat Insulators are specially designed to reduce noise and vibration that worn parts can transmit into the vehicle. Free shipping to all of USA!

    Fitment:

    2005 CHEVROLET SSR ALL

    • Series: Stage 1 Without Shocks
    • Front Drop Height: 2"
    • Rear Drop Height: 3"

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $358.00
    • Series: Stage 3 With Street Performance Shocks
    • Front Drop Height: 2"
    • Rear Drop Height: 3"

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $746.00
    • Shock Absorber
    • Series: B6 4600 Series
    • Position: Front
    • Quantity: 1 per pack

    Fitment:

    2005 CHEVROLET SSR BASE

    $112.79
    • RS5000X Series Suspension Strut Assembly
    • 16.08 in. Extended
    • 11.07 in. Collapsed
    • 5.01 in. Stroke

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 GAS

    $140.69
    • B6 4600 Shock Absorber
    • Position: Rear Driver or Passenger Side
    • Quantity: 1 per pack
    • 12.9mm Eye Upper/12.9mm Eye Lower Mounting
    • Monotube
    • Yellow
    • Boot Incl.

    Fitment:

    2005 CHEVROLET SSR BASE / 6.0L V8 GAS

    $103.19
    • Position: Rear Driver Or Passenger Side
    • Lower Mounting: Loop
    • Upper Mounting: Loop
    • Compressed Length: 14.00" (355.60 mm)
    • Extended Length: 22.50" (571.50 mm)
    • Bushing Inner Diameter: (Top)13.00 mm
    • Bushing Width: (Top)42.00 mm
    • Quantity: 1 per pack

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    • Position: Front Driver Or Passenger Side
    • Lower Mounting: Loop
    • Upper Mounting: Loop
    • Compressed Length: 8.50" (215.90 mm)
    • Extended Length: 12.50" (317.50 mm)
    • Quantity: 1 Assembly

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $129.50
    • RS5000X Series Shock Absorber
    • Extended Length: 23.21"
    • Collapsed Length: 14.56"
    • Stroke Length: 8.65"
    • Position: Rear Driver Or Passenger Side
    • Quantity: 1 per pack
    • For Stock Height Vehicles

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 GAS

    • Position: Rear Driver Or Passenger Side
    • Lower Mounting: Loop
    • Upper Mounting: Loop
    • Compressed Length: 14.00" (355.60 mm)
    • Extended Length: 22.50" (571.50 mm)
    • Bushing Inner Diameter: (Top)13.00 mm
    • Bushing Width: (Top)42.00 mm
    • Quantity: 1 per pack

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    • Position: Front And Rear
    • Lift Height: 0"-1"
    • Quantity: 2 Strut Assemblies, 2 Shock Absorbers

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $388.00
    • Position: Front And Rear
    • Quantity: Sold as Set

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $398.00
    • Position: Front And Rear
    • Front Drop Height: 1"-2.5"
    • Rear Drop Height: 0"-3"
    • Internal Design: Twin-Tube
    • Shock Absorber Type: Hydraulic
    • Adjustment Type: Double Adjustment
    • Height Adjustment Type: Threaded Spacer
    • Damper Material: Stainless Steel
    • Quantity: Sold as a Kit

    Fitment:

    2005 CHEVROLET SSR 6.0L V8 / BASE / Convertible / 49.0 in./4 ft. 1 in. Bed / Rear Wheel Drive

    $1,995.00
    • Position: Rear Driver Or Passenger Side
    • Lower Mounting: Loop
    • Upper Mounting: Loop
    • Compressed Length: 13.00" (330.20 mm)
    • Extended Length: 20.50" (520.70 mm)
    • Bushing Inner Diameter: (Top)13.00 mm
    • Bushing Width: (Top)42.00 mm
    • Quantity: 1 per pack

    Fitment:

    2005 CHEVROLET SSR BASE

Results Per Page:

1-20 of 23 Results

1-20 of 23 Results