1991 BUICK COMMERCIAL CHASSIS Performance Parts

Results Per Page:

42 Results

42 Results
  1. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Early Type [Socket]/Late [HEI] Caps
    • Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $153.95
  2. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $502.95
  3. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $420.95
  4. B&M Braided Transmission Fluid Dipsticks allow you to check your transmission oil with a high quality aluminum-braided transmission fluid dipstick. They feature a stylish, flexible design with an O-ring sealed cap that screws directly into the tube to prevent leaks. The base of the tube comes with a sealing grommet where it goes into the transmission.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  5. Key Features:
    • High Performance Thermostat
    • 180 deg.
    • Race Only

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  6. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  7. Key Features:
    • Transmission Mount
    • Black
    • Zinc Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  8. Key Features:
    • Transmission Mount
    • Red
    • Zinc Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  9. Key Features:
    • Transmission Mount
    • Black
    • Chrome Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  10. Key Features:
    • Universal Spark Plug Wire Set
    • Black Super Conductor 8.5mm
    • 8.5mm
    • Fits Engines w/Late-model Type HEI Distributor Caps
    • Includes [8] 90 Degree Boots/Terminal Ends

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $143.95
  11. Key Features:
    • Street Fire Spark Plug Wire Set
    • Socket/HEI
    • Multi-Angle

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  12. Key Features:
    • Street Fire Spark Plug Wire Set
    • HEI
    • Multi-Angle Plug
    • Universal

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  13. Key Features:
    • Street Fire Spark Plug Wire Set
    • HEI/90 deg.
    • Universal

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  14. Key Features:
    • Universal Spark Plug Wire Set
    • Black Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Early Type [Socket]/Late [HEI] Caps
    • Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $153.95
  15. B&M Transkit is the ultimate transmission kit developed to fit specific vehicles. The 70226 Transkit is designed for GM 4L80E Transmissions to greatly improve their shifting performance. This comprehensive B&M shift improver kit includes all required parts to fine tune your automatic transmission to BM specifications. The package comes with complete instructions and comes with full manufacturer warranty.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $147.95
  16. B&M Shift Improver Kits offer you a quick and affordable way to improve the performance on any stock automatic transmission. The kits eliminate shift overlap and excess wear on clutches and band. You will be able to chose between two stages to fit your individual needs: an RV/Towing stage and a Street/Strip stage.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  17. Key Features:
    • High Performance Thermostat
    • 160 deg.
    • Race Only

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  18. Key Features:
    • High Performance Thermostat
    • 195 deg.
    • Race Only

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  19. Key Features:
    • Motor Mount
    • Red
    • Zinc
    • Sold Individually
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  20. Key Features:
    • Motor And Transmission Mount
    • Black
    • Zinc Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $104.44
  21. Key Features:
    • Transmission Mount
    • Red
    • Chrome Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  22. Key Features:
    • GM Transmission Mount
    • Black
    • Short
    • Performance Polyurethane
    • For Use w/Custom Applications

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  23. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $717.95
  24. Key Features:
    • Tubular Sway Bar
    • Front
    • 1 3/8 in. Bar Diameter.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $437.42
  25. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  26. Key Features:
    • Motor Mount
    • Black
    • Zinc
    • Sold Individually
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  27. Key Features:
    • Motor And Transmission Mount
    • Red
    • Zinc Finish
    • Performance Polyurethane

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $104.44
  28. Key Features:
    • GM Transmission Mount
    • Red
    • Short
    • Performance Polyurethane
    • For Use w/Custom Applications

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  29. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits Engines w/Late-model Type HEI Distributor Caps
    • Includes [8] 90 Degree Boots/Terminal Ends

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $143.95
  30. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]
    • Includes: Wires/90 Degree Boots/Terminals

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $143.95
  31. Key Features:
    • Universal Spark Plug Wire Set
    • Black Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Late Model HEI Caps [Ford Duraspark Or MSD Cap-A-Dapt]
    • Includes: Wires/90 Degree Boots/Terminals

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $143.95
  32. Key Features:
    • HEI Remote Mount Super Coil
    • Primary Resist 0.3 Ohms
    • Secondary 8.8k Ohms
    • Turn Ratio 134:1
    • Max Voltage 48000V

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  33. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  34. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $338.95
  35. B&M Automatic Transmission Filter Extensions are the perfect solution if you want to move your transmission filter into the oil in aftermarket B&M Transmission Pans. They are ideal for racing, towing, off-roading or just everyday driving in hot weather. They allow your transmission to operate at cooler temperatures for improved efficiency and durability! These B&M extensions are crafted from cast aluminum and come with all necessary mounting bolts to fit the valving body.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  36. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $102.95
  37. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $594.95
  38. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  39. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $645.95
    • Automatic Transmission Shift Lever
    • Incl. Shift Lever/Swivel/Cotter Pin
    • Natural Finish

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Configuration: Universal
    • CARB (California) Compliant: Yes
    • CARB EO#: D-193-150
    • Air Tube Adaptable: No
    • Body Shape: Round
    • Body Length: 13.25"
    • Body Width: 4"
    • Body Height: 4"
    • Inlet Connection Type: Weld-On
    • Outlet Connection Type: Weld-On
    • Body Material: Stainless Steel
    • Quantity: Sold Individually

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS / 2.25" / 2.25"

    $560.00
    • Automotive Battery
    • Group 78
    • 1500 PHCA
    • 880 CCA
    • 1050 MCA
    • RC Min. 135
    • L-10.85 in.
    • W-6.99 in.
    • H-7.12 in. w/3/8 Threaded Side Receptacles

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $413.47
Results Per Page:

42 Results

42 Results