1988 CHEVROLET V20 SUBURBAN Performance Parts

Results Per Page:

1-20 of 39 Results

1-20 of 39 Results
  1. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $297.95
  2. Key Features:
    • Alternator Bracket
    • Chevrolet Generator/Alternator

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

  3. Key Features:
    • Action +Plus Water Pump
    • Polished
    • Aluminum
    • Twisted Short Style
    • Not For Competition Use

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $215.95
  4. Key Features:
    • Team G Water Pump
    • Satin Finish
    • 356-T Aluminum Alloy
    • Adjustable Design
    • w/Twisted Snout Design
    • Short Style

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $226.22
  5. Key Features:
    • Action +Plus Water Pump
    • Satin Finish
    • Aluminum
    • Twisted Long Style
    • Not For Competition Use

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $168.95
  6. Key Features:
    • X-CELerator Intake Manifold
    • IMCA-Approved
    • Power Band To 7000 RPM
    • Square Carb. Mounting Flange
    • Satin Finish

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $248.61
  7. B&M Vacuum Modulators will help you to perfectly calibrate your shift points withing a range of 2-4 mph. They are crafted in gold cadmium finish and an O-ring seal to avoid leaks. Available with pre-adjusted shift points for your convenience.

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

  8. B&M Governor Recalibration Kit allows you to easily recalibrate the shift points of your transmission after you install it. The readjustment is possible through the governor cover located on the side of your transmission and takes no longer than a couple of minutes. This kit is ideal for effortless transmission swaps on lightweight vehicles and vehicles with low rear gear cargo. It comes packaged with an O-ring, a gasket, weights, springs and all other required hardware. Please keep in mind that this kit is not legal for use on emission controlled vehicles.

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $102.95
  9. B&M Automatic Transmission Filter Extensions are the perfect solution if you want to move your transmission filter into the oil in aftermarket B&M Transmission Pans. They are ideal for racing, towing, off-roading or just everyday driving in hot weather. They allow your transmission to operate at cooler temperatures for improved efficiency and durability! These B&M extensions are crafted from cast aluminum and come with all necessary mounting bolts to fit the valving body.

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

  10. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $358.95
  11. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $699.95
  12. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $307.95
  13. Key Features:
    • Hi-Ram Intake Manifold Top
    • 2x4 4150 Flange Top
    • For Use w/PN [1984WND]

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $351.95
  14. Key Features:
    • Action +Plus Water Pump
    • Satin Finish
    • Aluminum
    • Twisted Short Style
    • Not For Competition Use

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $168.95
  15. Key Features:
    • Action +Plus Water Pump
    • Polished
    • Aluminum
    • Twisted Long Style
    • Not For Competition Use

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $215.95
  16. Key Features:
    • Stealth Ram Intake Manifold
    • Power Band Idle-6500 RPM
    • EFI Retrofit/TPI Replacement
    • D-Port
    • Universal Mounting Bolt
    • Non-EGR
    • Satin Finish

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $596.95
  17. Key Features:
    • Supercharger Remote Thermostat Housing
    • For Use w/6-71/8-71 Supercharger
    • Polished Finish

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS

    $164.95
  18. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

  19. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $266.95
  20. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1988 CHEVROLET V20 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel, 7.4L V8 GAS

    $481.95
Results Per Page:

1-20 of 39 Results

1-20 of 39 Results