1987 PONTIAC BONNEVILLE Performance Parts

    • Air Filter Color: Red
    • Air Filter Shape: Panel

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

  1. Key Features:
    • ThermoMaster Power Chip
    • w/Overdrive

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

    $146.28
  2. Key Features:
    • Performer-Plus Camshaft Kit
    • Hyd.
    • Off-Idle-5500rpm
    • Adv. Dur. 280 deg. Int/290 deg. Exh
    • Valve Lift 0.448 Int/0.472 Exh.

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

    $382.29
  3. Key Features:
    • Performer-Link By Cloyes Timing Chain Set
    • Incl. Cam/Crank Sprocket/Chain
    • w/Integral Distributor Drive

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

    $103.61
  4. Russell Performance is a leading manufacturer of hoses, hose ends, fittings, and adapters you need, and provides a wide assortment of plumbing solutions with a variety of materials and finishes. You can find all Russell products here at a great price! Free shipping to all of USA!

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE

  5. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    1987 PONTIAC BONNEVILLE ALL

  6. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    1987 PONTIAC BONNEVILLE ALL

    • Position: Front
    • Rotor Construction: Vented 1-Piece
    • Rotor Style: Plain
    • Rotor Diameter: 10.2"
    • Quantity: Sold as a set

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

    $138.97
  7. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE

    $628.76
  8. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE

    $509.18
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Direct-Fit
    • Main Piping Diameter: 2.25"
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Body Length: 12"
    • Body Width: 5"
    • Overall Length: 37.5"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Exhaust Pipe Material: Stainless Steel
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: Pre And Post Converter
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Components: 1 Gasket

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS / 2.25" / 2.25"

    $220.00
  9. Key Features:
    • Blaster Ignition Coil
    • Direct Connection
    • GM 2 Tower

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

  10. Key Features:
    • Coil Interface Block
    • GM Dual Tower Coils

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

  11. Key Features:
    • Control Arm Bushing Set
    • Red
    • Rear Upper
    • Performance Polyurethane

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

  12. Key Features:
    • Drilled And Slotted
    • Cyro XDrilled
    • Fr Lt
    • 10.25 in. Dia.
    • 2.01 in. Height

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

    $163.21
  13. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

    • Series: Ultimax OE Pad, RK Series Rotor
    • Position: Front
    • Pad Material: Organic
    • FMSI: D215 Front
    • Rotor Construction: Vented 1-Piece Front
    • Rotor Style: Plain
    • Rotor Diameter: 10.2" Front

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

    $202.69
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2.25"
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Body Length: 12"
    • Body Width: 5.5"
    • Overall Length: 16"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: N/A

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS / 2.25" / 2.25"

    $119.00
  14. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 6 Cyl. w/Early Type [Socket]/Late Type [HEI] Dist. Caps
    • Includes [6] 90 Deg. Boots/Terminals

    Fitment:

    1987 PONTIAC BONNEVILLE 3.8L V6 GAS

    $133.95
  15. Key Features:
    • Drilled And Slotted
    • Front Left
    • 10.25 in. Dia.
    • 2.01 in. Height

    Fitment:

    1987 PONTIAC BONNEVILLE BASE, LE / 3.8L V6 GAS

    $136.81