1972 FORD MAVERICK Performance Parts

  1. Key Features:
    • Timing Cover Gasket And Oil Seal Kit
    • Incl. Front Cover Gasket/Crankshaft Seal/Fuel Pump Gasket/Water Pump Gasket

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  2. Key Features:
    • Performer RPM Camshaft Kit
    • Ford 289-302
    • Hyd.
    • 1500-6500rpm
    • Adv. Dur. 390deg. Int/300deg. Exh Valve Lift 0.496 Int/0.520 Exh
    • Req. Screw-In Studs/Guide plates

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $447.77
  3. Key Features:
    • RPM Air Gap 260/289/302 Intake Manifold
    • Cast Finish
    • Non-EGR
    • 1500-6500rpm
    • For 4 bbl Carbs
    • Incl. Nitrous Bosses

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $432.95
  4. Key Features:
    • Valve Cover Gasket Set
    • 5/16 in. Thickness
    • SBF

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  5. Key Features:
    • Cylinder Head Gasket
    • 4.1 in. Bore
    • 0.038 in. Compressed
    • 8.22cc Volume

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  6. Key Features:
    • Victor Series Water Pump
    • Aluminum
    • 5/8 in. Pilot Shaft
    • Left-Hand Inlet w/o Back Plate
    • Dimension From Block Surface To Hub 5 45/64 in.

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $318.07
  7. Key Features:
    • Intake Manifold Gasket Set
    • Port 1.2x2 in.
    • 0.060 in. Thickness

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  8. Key Features:
    • Intake Manifold Gasket Set
    • Port 1.2x2 in.
    • 0.060 in. Thickness
    • 10 pc.

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $180.05
  9. Key Features:
    • Pushrod
    • Hydraulic Roller Cams
    • 5/16 in. Dia.
    • 6.430 in.

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $205.95
  10. Key Features:
    • Performer Series Valve Seats
    • 1.9 in.

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $102.00
  11. Key Features:
    • Valve Spring Retainers
    • Street
    • Non-Rotator
    • Black-Oxide Finish
    • 16 pc.

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $106.60
  12. Key Features:
    • Victor Series Water Pump
    • Aluminum
    • 5/8 in. Shaft
    • Left-Hand Inlet w/o Back Plate
    • Dimension From Block Surface To Hub 5 45/64 in.
    • Black

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $358.95
  13. Key Features:
    • Performer RPM Cylinder Head
    • Chamber Size 65cc
    • Complete w/Springs For Hydraulic Roller
    • Single
    • 68-73 Chrysler 340

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

    $1,009.50
  14. Russell Performance is a leading manufacturer of hoses, hose ends, fittings, and adapters you need, and provides a wide assortment of plumbing solutions with a variety of materials and finishes. You can find all Russell products here at a great price! Free shipping to all of USA!

    Fitment:

    1972 FORD MAVERICK BASE

  15. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1972 FORD MAVERICK ALL / Rear Wheel Drive

  16. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1972 FORD MAVERICK ALL / Rear Wheel Drive

  17. Key Features:
    • 9mm Ignition Wire Set
    • 45 Deg. Boot
    • Red

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  18. Key Features:
    • Points Eliminator Kit
    • For Vehicles w/Motorcraft Single Point Distributors

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS

  19. Moroso is a recognized name in the performance industry manufacturing over four thousand products including everything from oil pans and oiling systems, to ignition wire, ignition components, valve covers, fuel system equipment, air cleaners, hard-core racing tools, chassis and suspension equipment and other. All Moroso products are manufactured from the highest quality materials, and specially created by racers for racers. Free shipping to all of USA!

    Fitment:

    1972 FORD MAVERICK 2.8L L6, 3.3L L6, 4.1L L6, 5.0L V8

  20. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Yellow
    • 8mm
    • Graphite Core
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1972 FORD MAVERICK 5.0L V8 GAS