1972 DODGE B200 VAN Suspension Systems

Results Per Page:

13 Results

13 Results
  1. Rancho RS5000 Steering Stabilizers offer you a quick and affordable way to improve your ride's performance and fine-tune your vehicle for off-road driving, towing and street applications. The stabilizers help you to reduce the steering shimmy, bump steer and annoying vibration. They are designed for vehicles with oversized wheels and tires, and are offered in single and dual configurations with Included brackets in case your vehicle does not have OE mounts. Plus, the RS5000 Steering Stabilizers come in a premium long-lasting finish with protective boot which shields the shock rod and oil seal. These superb stabilizers also come with a Limited Lifetime Warranty to ensure your investment!

    Fitment:

    1972 DODGE B200 VAN 3.2L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

  2. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1972 DODGE B200 VAN ALL

  3. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1972 DODGE B200 VAN ALL

  4. Key Features:
    • Strut Rod Bushing Set
    • Black
    • Front
    • Performance Polyurethane

    Fitment:

    1972 DODGE B200 VAN BASE, Maxi, Maxi Wagon, Sportsman / 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

  5. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1972 DODGE B200 VAN ALL / Rear Wheel Drive

  6. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Must Reuse All Metal Hardware
    • Performance Polyurethane

    Fitment:

    1972 DODGE B200 VAN BASE, Maxi, Maxi Wagon, Sportsman / 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

  7. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Must Reuse All Metal Hardware
    • Performance Polyurethane

    Fitment:

    1972 DODGE B200 VAN BASE, Maxi, Maxi Wagon, Sportsman / 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

  8. Key Features:
    • Strut Rod Bushing Set
    • Red
    • Front
    • Performance Polyurethane

    Fitment:

    1972 DODGE B200 VAN BASE, Maxi, Maxi Wagon, Sportsman / 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

    • Series: Shadow
    • Position: Front Driver Or Passenger Side
    • Upper Mount: Stem
    • Lower Mount: Bar Pin
    • Extended Length: 14.42"
    • Collapsed Length: 9.54"
    • Quantity: Sold Individually

    Fitment:

    1972 DODGE B200 VAN 3.2L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

  9. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1972 DODGE B200 VAN ALL / Rear Wheel Drive

  10. The RS 5000X is a brand new shock from Rancho delivering a highly advanced compression phase and cutting-edge valving system which decreases initial impacts! This high grade shock will significantly improve the overall handling and performance of your vehicle both on and off-road! The RS 5000X also comes with bigger 2-1/4-inch twin tube body, 16 mm nitro-carburized rod, black natural rubber bushings, a glass-filled/fluon banded piston and many more.

    Fitment:

    1972 DODGE B200 VAN 3.2L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

    • RS5000X Series Shock Absorber
    • 13.44 in. Extended Length
    • 9.25 in. Collapsed Length
    • 4.2 in. Stroke

    Fitment:

    1972 DODGE B200 VAN 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

    • Series: RS7MT
    • Position: Rear Driver Or Passenger Side
    • Internal Design: Monotube
    • Quantity: Sold Individually

    Fitment:

    1972 DODGE B200 VAN 3.2L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS, 5.9L V8 GAS, 6.6L V8 GAS

Results Per Page:

13 Results

13 Results