1967 BUICK SKYLARK Brands

Results Per Page:

15 Results

15 Results
  1. Key Features:
    • Blaster 2 Ignition Coil
    • High Performance
    • Red

    Fitment:

    1967 BUICK SKYLARK 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  2. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $358.95
  3. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $699.95
  4. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $266.95
  5. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $327.95
  6. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $461.95
  7. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $686.95
  8. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $696.95
  9. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $563.95
  10. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $481.95
  11. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $512.95
  12. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $538.95
  13. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $471.95
  14. Mallory Promaster Classic Series Coils are designed to meet today's specialized ignition requirements. These products are available with a faster rise time and increased spark duration to increase performance. They have a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. Free shipping to all of USA!

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $181.95
  15. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $543.95
Results Per Page:

15 Results

15 Results