1967 BUICK SKYLARK Brands

Results Per Page:

1-20 of 50 Results

1-20 of 50 Results
    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: No
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.781 in (96 mm)
    • Thread Specification: 13/16" - 16 UNS

    Fitment:

    1967 BUICK SKYLARK 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  1. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Early Type [Socket]/Late [HEI] Caps
    • Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $153.95
  2. B&M Braided Transmission Fluid Dipsticks allow you to check your transmission oil with a high quality aluminum-braided transmission fluid dipstick. They feature a stylish, flexible design with an O-ring sealed cap that screws directly into the tube to prevent leaks. The base of the tube comes with a sealing grommet where it goes into the transmission.

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  3. Key Features:
    • High Performance Thermostat
    • 180 deg.
    • Race Only

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  4. Fitment:

    1967 BUICK SKYLARK BASE / 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  5. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  6. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Red
    • 8mm
    • Spiral Core
    • 500 ohms Per Foot Of Resistance
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  7. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Yellow
    • 8mm
    • Graphite Core
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  8. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Blue
    • 8mm
    • Graphite Core
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  9. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Black
    • 8mm
    • Graphite Core
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  10. Key Features:
    • Universal Fit Spark Plug Wire Set
    • Black
    • 8mm
    • Spiral Core
    • 500 ohms Per Foot Of Resistance
    • Straight Boots
    • For Use w/Pre And Post HEI Vehicles

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  11. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 6 Cyl. w/Early Type [Socket]/Late Type [HEI] Dist. Caps
    • Includes [6] 90 Deg. Boots/Terminals

    Fitment:

    1967 BUICK SKYLARK 3.7L V6 GAS

    $133.95
  12. Key Features:
    • Street Fire Spark Plug Wire Set
    • Socket/HEI
    • Multi-Angle

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  13. Key Features:
    • Universal Spark Plug Wire Set
    • Black Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Early Type [Socket]/Late [HEI] Caps
    • Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $153.95
  14. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $358.95
  15. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

    $699.95
  16. Key Features:
    • High Performance Thermostat
    • 160 deg.
    • Race Only

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  17. Key Features:
    • High Performance Thermostat
    • 195 deg.
    • Race Only

    Fitment:

    1967 BUICK SKYLARK 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  18. Key Features:
    • Electric Fuel Pump
    • For Use w/Carburetor
    • Domestic
    • 4-7 psi
    • 35 gph

    Fitment:

    1967 BUICK SKYLARK 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

  19. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1967 BUICK SKYLARK BASE / 3.7L V6 GAS, 4.9L V8 GAS, 5.6L V8 GAS, 6.6L V8 GAS

Results Per Page:

1-20 of 50 Results

1-20 of 50 Results