Flowtech 31154FLT - Ceramic Headers

Part #31154FLT

Flowtech 31154FLT - Ceramic Headers

Part #31154FLT
$484.95
Buy now and save $48.50
$533.45
Free Shipping
Fitment Guaranteed
No Border Fees
Lowest Price Guaranteed
Authorized Dealer
Tax Free Ordering

Product Info

Flowtech Brand Banner - US

Flowtech 31154FLT - Ceramic Headers

Flowtech Headers are engineered to get maximum performance and fuel economy from your engine. Each header is formed specially selected .049 cold roll flash controlled tubing, and is available with Flowtech thick, mandrel-formed Power Plenum collector. All ports are precisely fitted and finished with sturdy, leak-proof O-ringed port seals. They come packaged with all mounting hardware including bolts, nuts, and are available with satin black finishing or with a specially formulated, silver luster ceramic coating for rust and corrosion resistance. Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. Flowtech does not recommend the use of header wraps as this will void the warranty.

Key Features:
  • Ceramic Header
  • Primary Tube Coll. Size 1.75x3 in.
  • Modify Stock Exh. To Retain Cat. Converter
Note: Automotive Stuff is an authorized dealer of all Flowtech products, so your new product will include the full factory warranty.

Flowtech Brand Banner - about

Flowtech Performance Exhaust was founded in 1994, by Gary Biggs - exhaust market expert, and became the leader in value priced exhaust systems in less than two decades. In 1999 Flowtech joined Holley Performance Products.

Description

Key Features:
  • Ceramic Header
  • Primary Tube Coll. Size 1.75x3 in.
  • Modify Stock Exh. To Retain Cat. Converter

Vehicle Fitment

Year Make Model Submodel Engine Size Transmission Type
1965 - 1967 OLDSMOBILE 442 BASE 6.6L V8 GAS N/A
1968 - 1969 OLDSMOBILE 442 BASE 6.6L V8 GAS, 7.5L V8 GAS N/A
1970 - 1971 OLDSMOBILE 442 BASE 7.5L V8 GAS N/A
1965 - 1966 OLDSMOBILE CUTLASS BASE 6.6L V8 GAS N/A
1970 OLDSMOBILE CUTLASS BASE 7.5L V8 GAS N/A
1971 OLDSMOBILE CUTLASS S 7.5L V8 GAS N/A
1972 - 1974 OLDSMOBILE CUTLASS BASE, S 7.5L V8 GAS N/A
1975 OLDSMOBILE CUTLASS 442, BASE, S 7.5L V8 GAS N/A
1975 OLDSMOBILE CUTLASS SALON BASE 7.5L V8 GAS N/A
1971 - 1973 OLDSMOBILE CUTLASS SUPREME BASE 7.5L V8 GAS N/A
1974 - 1975 OLDSMOBILE CUTLASS SUPREME BASE, Cruiser 7.5L V8 GAS N/A
1971 OLDSMOBILE DELTA 88 BASE, CUSTOM, Royale 7.5L V8 GAS Automatic Trans
1972 - 1974 OLDSMOBILE DELTA 88 BASE, Royale 7.5L V8 GAS Automatic Trans, N/A
1975 OLDSMOBILE DELTA 88 BASE, Royale 6.6L V8 GAS, 7.5L V8 GAS Automatic Trans, N/A

Reviews

Write a Review

Submit a review for: Flowtech 31154FLT - Ceramic Headers

Rating: