2011 RAM 1500 Suspension Systems

  1. Rancho Loaded quickLIFT Complete Strut Assembly provides additional clearance, allowing you to use larger tires and wheels. The Loaded quickLIFT features 9-position tuning technology to perfectly adjust your ride quality and performance. The assembly levels your front Suspension, removes its factory rake and provides 1-2.5 inches of additional lift and also gives your vehicle a custom aggressive look! The Loaded quickLIFT assembly is fully compatible with your Rancho MyRIDE Wi-Fi Controller, allowing you to fine-tune the units wirelessly from the cab. It comes in a liquid metallic silver and with a Limited Lifetime Warranty to protect your investment!

    Fitment:

    2011 RAM 1500 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive

    $244.99
  2. Key Features:
    • Lift Kit
    • 4 in. Lift

    Fitment:

    2011 RAM 1500 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive

    $817.42
  3. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2011 RAM 1500 ALL / 4 Wheel Drive

    $147.89
  4. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2011 RAM 1500 ALL / Rear Wheel Drive

  5. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    2011 RAM 1500 ALL / 4 Wheel Drive

  6. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN

    $437.44
  7. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN

    $628.76
  8. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN

    $338.78
  9. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN

    $509.18
  10. Key Features:
    • Air Lift 1000 Replacement Bag
    • For PN[60818]

    Fitment:

    2011 RAM 1500 LARAMIE, LARAMIE LONGHORN, SLT, SPORT, ST

  11. Key Features:
    • Air Lift 1000 Coil Spring
    • Rear
    • No Drill
    • Installation Time - 1 Hour Or Less

    Fitment:

    2011 RAM 1500 LARAMIE, LARAMIE LONGHORN, SLT, SPORT, ST

    $132.96
  12. Key Features:
    • LoadLifter 5000 Ultimate Replacement Air Spring
    • Includes Hardware And One Air Spring
    • Not Full Kit
    • For PN[88295/88289]

    Fitment:

    2011 RAM 1500 LARAMIE, LARAMIE LONGHORN, SLT, SPORT, ST

    $163.76
  13. Fabtech Basic Lift Kit-Suspension Systems combine the smoothest highway ride with outstanding off-road damping power for the best of both worlds. These superior systems feature a one-piece high arched lower crossmember design with an integrated differential skid plate that delivers maximum support of the front Suspension. The lower control arm Crossmembers come with cross tubes supported by tubular frame struts for maximum strength and even distribution of front Suspension impact loads. Another premium feature of this advanced Lift Kit-Suspension system is the replacement extended length steering knuckles, which will keep the track width of your vehicle near stock while retaining turning radius to allow easy maneuverability. The systems' front differential is protected using a rock-solid 1/4 in. thick steel skid plate. In addition, you do not have to Relocate the Rack and Pinion or disassemble the front strut assemblies in order to install the this lift kit.

    Fitment:

    2011 RAM 1500 4 Wheel Drive

    $2,852.11
  14. Key Features:
    • Level Lift Strut Extension
    • Front Max Lift 2.0 in.

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN / 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive, Rear Wheel Drive

    $179.99
  15. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2011 RAM 1500 LARAMIE, SLT, ST / 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive

  16. Key Features:
    • Stage I Lift Kit
    • 6 in. Lift
    • Front Strut Spacer And Rear ES9000

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN / 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS

    $3,132.38
  17. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2011 RAM 1500 BIG HORN, LARAMIE, LARAMIE LONGHORN, OUTDOORSMAN, SLT, SPORT, ST, TRADESMAN / 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / Rear Wheel Drive

    $100.00
  18. Key Features:
    • Leveling Kit
    • 1 in. to 2 in. Lift
    • 1.5 in. Size

    Fitment:

    2011 RAM 1500 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive

  19. Key Features:
    • SX8000 Shock Absorber
    • 2 Required

    Fitment:

    2011 RAM 1500 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive

  20. Key Features:
    • SX6000 Shock Absorber
    • Incl. Multi-Fit Hardware Pack
    • 2 Required

    Fitment:

    2011 RAM 1500 3.7L V6 GAS, 4.7L V8 FLEX, 5.7L V8 GAS / 4 Wheel Drive