2010 TOYOTA FJ CRUISER Suspension Systems

Skyjacker Torsion Key Leveling Kit offers you a set of re-engineered forged torsion adjustment keys that will help you level out the front of all torsion bar-equipped 2wd and 4wd trucks and SUVs. The Torsion Key Leveling kit does not compromise the factory ride and allows for up to 33 inch tall tires. Skyjacker Torsion Keys are manufactured only from the highest quality materials to ensure superior strength and durability. The tight tolerance design increases the surface area contact between the torsion key and bar, adding to the overall strength and product longevity. This kit can provide up to 2 inches of lift in the front suspension and will remove the sagging of the front-end. Order your Torsion Key Leveling Kit today!

• 6112 Series Suspension Kit

Key Features:

• Fox 2.0 Performance Series Smooth Body IFP Shock
• Aluminum
• Extended 23.55 in.
• Collapsed 14.95 in.
• Stroke 8.6 in.

• Suspension Enhancement System
• Weight Capacity 1800 lbs.
• Front

• Suspension Enhancement System
• Weight Capacity 3000 lbs.
• Rear

Key Features:

• Load Controller I On-Board Air Compressor Control System
• Single Needle
• Front
• Installation Time - 1 Hour Or Less

Key Features:

• On Board Air Compressor Kit
• Single Gauge/Dual Control/Dual Needle

Key Features:

• Load Controller
• Single
• Heavy Duty

Key Features:

• Load Controller
• Dual
• Heavy Duty

Key Features:

• ES9000 Shock Absorber

Key Features:

• ES3000 Shock Absorber

Key Features:

• Poly Lift Strut Spacer
• Max. Lift 2.5 in.
• Max. Tire Diameter 33 in.

Key Features:

• Level Lift Strut Extension
• Front Max. Lift 2.25 in.

Key Features:

• Level Lift Nitro Kit
• Lift Height 3 Inch Front
• 2 Inch Rear
• Strut Spacers
• Coil Spring Spacers
• Includes All necessary Hardware And Instructions

Key Features:

• Suspension Component Box
• For 5.5 in. Lift
• Box 1
• For PN[K5078B/K5078BMX]

Key Features:

• Leveling Kit
• 2 in. Lift

Key Features:

• Coil Spring
• Set Of 2
• Front w/3 in. Lift
• Grey

Key Features:

• Coil Spring
• Set Of 2
• Rear w/3 in. Lift
• Grey

Fabtech Basic Lift Kit-Suspension Systems combine the smoothest highway ride with outstanding off-road damping power for the best of both worlds. These superior systems feature a one-piece high arched lower crossmember design with an integrated differential skid plate that delivers maximum support of the front Suspension. The lower control arm Crossmembers come with cross tubes supported by tubular frame struts for maximum strength and even distribution of front Suspension impact loads. Another premium feature of this advanced Lift Kit-Suspension system is the replacement extended length steering knuckles, which will keep the track width of your vehicle near stock while retaining turning radius to allow easy maneuverability. The systems' front differential is protected using a rock-solid 1/4 in. thick steel skid plate. In addition, you do not have to Relocate the Rack and Pinion or disassemble the front strut assemblies in order to install the this lift kit.

Skyjacker Extended Sway Bar End Links offer an easy way to correct the angle of the sway after your 4WD vehicle has been lifted. They are made from high-quality materials and come with durable polyurethane bushings for optimal performance. Purchase your Skyjacker Extended Sway Bar End Links today and improve your suspension geometry throughout the entire travel!