2010 HONDA ACCORD Engine Components

Key Features:

• Pro GUARD D2 Oil Filter
• Heavy Duty Canister
• Built In 3/8in. Nut/Ratchet Drive
• Heavy Duty Coil Spring
• Wire Backed Media
• Center Tube

• OE Replacement Oil Filter
• Style: Spin-On Lube Filter
• Outer Diameter Top: 2.69"
• Inner Diameter Top: Closed
• Class: A
• Duty Type: LD
• Media Material: Enhanced Cellulose
• Height: 3.4"
• Micron: 21 Microns
• Beta Ratio: 2/20 - 6/20
• Burst Pressure: 363 PSI
• By-Pass Relief Valve Setting: 8-11
• Thread Size: 20 x 1.5mm
• Case Quantity: 12

• Product Style: Oil Filters
• Style: Canister
• Anti-Drain Back Valve: Yes
• Bypass Valve: Yes
• Filter Material: High Flow Premium Media
• Gasket Material: Nitrile Rubber
• Outside Diameter: 2.688 in (68 mm)
• Thread Specification: M20 x 1.5

• 88lb seat pressure at 32.85mm installed height using the OEM spring base
• 228lb at 11.0mm valve lift
• 262lb at 12.0mm valve lift
• Coil bind (solid spring height) 18.55mm
• Includes: Titanium Retainers
• Sold as set

Wix Filters Oil Filters are created to protect the engine from premature wear by removing the abrasive contaminants in the engine lubricating system. They are manufactured of pleated paper which arrests various types of suspended materials. Wix Filters patented the first spin-on oil filter in 1954 and has been a leading name in oil filter technology ever since. Free shipping to all of USA!

Skunk2 Ultra Series Connecting Rods are built from forged 4340 Chromoly steel and heat treated for ultimate strength. The Ultra Rods feature an x-beam style resulting in significantly reduced weight. This design also ensures maximum strength by removing material and strategically shaping the beam. Each rod features ribs / straps on the pin end to increase strength and stiffness under high loads and engine speeds. In addition, the step on the big end (crank journal side) provides additional strength and rigidity and maintain perfect roundness. If you're looking for the best rods, with the highest strength to weight ratio to support your circuit and drag racing, then Skunk2's Ultra Series Connecting Rods are just what you need. Please note that the rods are not compatible with OEM pistons. Order yours today!

Wix Filters Oil Filters are created to protect the engine from premature wear by removing the abrasive contaminants in the engine lubricating system. They are manufactured of pleated paper which arrests various types of suspended materials. Wix Filters patented the first spin-on oil filter in 1954 and has been a leading name in oil filter technology ever since. Free shipping to all of USA!

Skunk2 Alpha Series Titanium Retainers are designed to significantly reduce valvetrain mass, resulting in more horsepower and improved stability. These industry-leading Alpha Series Titanium Retainers feature special radius-cut edges providing additional rocker arm clearance and reduced weight. The retainers are engineered with strategically positioned lightening grooves, and reduced overall heights for better valve seal clearance and additional weight reduction.

Skunk2 4-Bar MAP Sensors offer you the perfect way to replace your factory-issued MAP sensors. Skunk2 4-Bar MAP Sensors are plug-in compatible sensors developed specifically for K-series engines. Each sensor is made from high-quality materials to ensure ultimate durability and years of worry-free use!

Key Features:

• Pro GUARD D2 Oil Filter
• Heavy Duty Canister
• Built In 3/8in. Nut/Ratchet Drive
• Heavy Duty Coil Spring
• Wire Backed Media
• Center Tube
• 4 Pack

Wix Filters Oil Filters are created to protect the engine from premature wear by removing the abrasive contaminants in the engine lubricating system. They are manufactured of pleated paper which arrests various types of suspended materials. Wix Filters patented the first spin-on oil filter in 1954 and has been a leading name in oil filter technology ever since. Free shipping to all of USA!

Skunk2 Ultra Series Connecting Rods are built from forged 4340 Chromoly steel and heat treated for ultimate strength. The Ultra Rods feature an x-beam style resulting in significantly reduced weight. This design also ensures maximum strength by removing material and strategically shaping the beam. Each rod features ribs / straps on the pin end to increase strength and stiffness under high loads and engine speeds. In addition, the step on the big end (crank journal side) provides additional strength and rigidity and maintain perfect roundness. If you're looking for the best rods, with the highest strength to weight ratio to support your circuit and drag racing, then Skunk2's Ultra Series Connecting Rods are just what you need. Please note that the rods are not compatible with OEM pistons. Order yours today!

Skunk2 4-Bar MAP Sensors offer you the perfect way to replace your factory-issued MAP sensors. Skunk2 4-Bar MAP Sensors are plug-in compatible sensors developed specifically for K-series engines. Each sensor is made from high-quality materials to ensure ultimate durability and years of worry-free use!