2009 FORD F-550 SUPER DUTY Fabtech

Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

Fabtech Basic Lift Kit-Suspension Systems combine the smoothest highway ride with outstanding off-road damping power for the best of both worlds. These superior systems feature a one-piece high arched lower crossmember design with an integrated differential skid plate that delivers maximum support of the front Suspension. The lower control arm Crossmembers come with cross tubes supported by tubular frame struts for maximum strength and even distribution of front Suspension impact loads. Another premium feature of this advanced Lift Kit-Suspension system is the replacement extended length steering knuckles, which will keep the track width of your vehicle near stock while retaining turning radius to allow easy maneuverability. The systems' front differential is protected using a rock-solid 1/4 in. thick steel skid plate. In addition, you do not have to Relocate the Rack and Pinion or disassemble the front strut assemblies in order to install the this lift kit.

Fabtech Budget Lift Kit Systems are designed to increase off-road performance and give you a good highway ride. This Fabtech lift kit can fit tires up to 35 inches tall and comes packaged with all you need for the installation ? front Sway Bar Links, front Bump Stops, rear Bump Stop extensions, Rear Trac Bar bracket, rear Brake Hose Extension Bracket and Emergency Brake cable brackets. The Budget Lift Kits are available with either Fabtech Performance Shocks or Fabtech Dirt Logic Shocks. Backed by a Limited Lifetime Warranty to guarantee your investment!

Fabtech Radius Arm Lift Kit-Suspension is a 6-inch radius arm system featuring a full tubular design that is reinforced with dimple die side plates, and an adjustable cam at the axle designed to allow proper caster calibration. This system allows you to lift the front with Fabtech's Dirt Logic 4.0 Coil over Shock conversion. The Arm Lift Kit comes with a Trac Bar Relocation bracket, Pitman Arm, Sway Bar drops, block and U-Bolt kit. Backed by a Limited Lifetime Warranty to protect your investment.

These legendary Fabtech 4-Link Lift Kit Suspension systems provide unsurpassed articulation and wheel travel. The 4-Link Systems come with a large 2" OD heavy wall links in combination with race grade 1" Uniballs for unparalleled strength. Another premium feature of the famous 4-Link is the 1/4" steel bracket design which secures the systems to the frame without cutting or welding. Included in the package are Coil springs, Billet Sway bar links, Trac Bar Relocation bracket and Pitman Arm. The Lift Kit-Suspension Systems are backed by a limited lifetime warranty.

Fabtech Lift Kit-Suspension Components Box Includes allow you to upgrade your vehicle's Suspension for a smooth operation at all speeds. The kit allows you add 6 in. of rear lift and add clearance for larger tires. All of the parts in the Lift Kit-Suspension Box are made in the USA, and are designed from the highest quality materials to ensure superior performance and functionality.

Fabtech Lift Kit-Suspension Components Box Includes allow you to upgrade your vehicle's Suspension for a smooth operation at all speeds. The kit allows you add 6 in. of rear lift and add clearance for larger tires. All of the parts in the Lift Kit-Suspension Box are made in the USA, and are designed from the highest quality materials to ensure superior performance and functionality.

Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

Fabtech Basic Lift Kit-Suspension Systems combine the smoothest highway ride with outstanding off-road damping power for the best of both worlds. These superior systems feature a one-piece high arched lower crossmember design with an integrated differential skid plate that delivers maximum support of the front Suspension. The lower control arm Crossmembers come with cross tubes supported by tubular frame struts for maximum strength and even distribution of front Suspension impact loads. Another premium feature of this advanced Lift Kit-Suspension system is the replacement extended length steering knuckles, which will keep the track width of your vehicle near stock while retaining turning radius to allow easy maneuverability. The systems' front differential is protected using a rock-solid 1/4 in. thick steel skid plate. In addition, you do not have to Relocate the Rack and Pinion or disassemble the front strut assemblies in order to install the this lift kit.

Fabtech Radius Arms provide 6 in. of lift and are designed to be stronger then stock units. They are crafted using the latest forging and CNC machining technology at Fabtech's enormous production facility in Chino, California. The Radius Arms come with a driver side and passenger side hardware and are backed by a Limited Lifetime Warranty to guarantee your investment!

These legendary Fabtech 4-Link Lift Kit Suspension systems provide unsurpassed articulation and wheel travel. The 4-Link Systems come with a large 2" OD heavy wall links in combination with race grade 1" Uniballs for unparalleled strength. Another premium feature of the famous 4-Link is the 1/4" steel bracket design which secures the systems to the frame without cutting or welding. Included in the package are Coil springs, Billet Sway bar links, Trac Bar Relocation bracket and Pitman Arm. The Lift Kit-Suspension Systems are backed by a limited lifetime warranty.

Fabtech Dirt Logic Shock Absorbers are the best shocks you can get if you look for shock that practically eclipse all other competitors on the market! The 2.25 shocks by Fabtech are pure masterpiece when it comes to performance, innovative manufacturing and appearance. Dirt Logic are developed with all new Stainless Steel and Aluminum construction that allows for greater heat dissipation. This design keeps the shock cooler and reduce fade during aggressive off-road use. What's more ? Dirt Logic 2.25" shocks come with urethane bushings in the mounting points to minimize road noise and rattling associated with spherical bearings. The coil over shocks utilize spherical bearings at each end for massive strength efficiency! Plus, dirt Logic 2.25" coil over shocks use coil springs made to the highest quality standards possible. You cannot find better shock absorbers than these ? you're at the right place!

Fabtech Dirt Logic Shock Absorbers are the best shocks you can get if you look for shock that practically eclipse all other competitors on the market! The 2.25 shocks by Fabtech are pure masterpiece when it comes to performance, innovative manufacturing and appearance. Dirt Logic are developed with all new Stainless Steel and Aluminum construction that allows for greater heat dissipation. This design keeps the shock cooler and reduce fade during aggressive off-road use. What's more ? Dirt Logic 2.25" shocks come with urethane bushings in the mounting points to minimize road noise and rattling associated with spherical bearings. The coil over shocks utilize spherical bearings at each end for massive strength efficiency! Plus, dirt Logic 2.25" coil over shocks use coil springs made to the highest quality standards possible. You cannot find better shock absorbers than these ? you're at the right place!

Fabtech Suspension Front Leveling Kit will upgrade your vehicle's Suspension system and improve its handling capabilities by allowing you to raise the height of your ride and reduce body roll. The Front Leveling Kit uses belt spacers that coordinate with your factory front Coil over shock absorbers ? this results in a highly compliant, stock like handling. Plus, this kit is backed by a Limited Lifetime Warranty to guarantee your investment.

Fabtech's 7 inch lift Stealth Monotube shock absorbers are built with a one-of-a-kind monotube construction with a stylish black finish with raised nameplate! Each Stealth shock absorber has a 46mm high flow piston that separates the nitrogen gas charge from the oil to guarantee optimal damping efficiency and the best driving experience through smart shock engineering! These superior Stealth Monotube shocks will allow you to fully optimize your Suspension and reduce shock fade during off-roading. The shocks are offered with 50mm OD seamless steel body and 14mm Nitrocarb piston rod to provide maximum protection from rocks, road debris and corrosion!

Fabtech Radius Arms provide 6 in. of lift and are designed to be stronger then stock units. They are crafted using the latest forging and CNC machining technology at Fabtech's enormous production facility in Chino, California. The Radius Arms come with a driver side and passenger side hardware and are backed by a Limited Lifetime Warranty to guarantee your investment!

These legendary Fabtech 4-Link Lift Kit Suspension systems provide unsurpassed articulation and wheel travel. The 4-Link Systems come with a large 2" OD heavy wall links in combination with race grade 1" Uniballs for unparalleled strength. Another premium feature of the famous 4-Link is the 1/4" steel bracket design which secures the systems to the frame without cutting or welding. Included in the package are Coil springs, Billet Sway bar links, Trac Bar Relocation bracket and Pitman Arm. The Lift Kit-Suspension Systems are backed by a limited lifetime warranty.

Fabtech's 7 inch lift Stealth Monotube shock absorbers are built with a one-of-a-kind monotube construction with a stylish black finish with raised nameplate! Each Stealth shock absorber has a 46mm high flow piston that separates the nitrogen gas charge from the oil to guarantee optimal damping efficiency and the best driving experience through smart shock engineering! These superior Stealth Monotube shocks will allow you to fully optimize your Suspension and reduce shock fade during off-roading. The shocks are offered with 50mm OD seamless steel body and 14mm Nitrocarb piston rod to provide maximum protection from rocks, road debris and corrosion!

Fabtech Radius Arms provide 6 in. of lift and are designed to be stronger then stock units. They are crafted using the latest forging and CNC machining technology at Fabtech's enormous production facility in Chino, California. The Radius Arms come with a driver side and passenger side hardware and are backed by a Limited Lifetime Warranty to guarantee your investment!