2008 CHEVROLET TRAILBLAZER Suspension Systems

Results Per Page:

1-20 of 68 Results

1-20 of 68 Results
  1. Key Features:
    • SST Lift Kit
    • 2 in. Front/1 in. Rear Lift

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT, Ss

    $269.96
  2. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $437.44
  3. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $628.76
  4. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $338.78
  5. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $509.18
  6. Key Features:
    • Air Lift 1000 Coil Spring
    • Rear
    • No Drill
    • Installation Time - 1 Hour Or Less
    • Except Factory Air Spring Option

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT / 4 Wheel Drive

    $140.79
  7. Key Features:
    • Level Lift Nitro Kit
    • Lift Height 2 Inch Front
    • 1 Inch Rear
    • Strut Spacer
    • Coil Spring Spacer
    • Includes All necessary Hardware And Instructions

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT / 4.2L L6 GAS, 5.3L V8 GAS / 4 Wheel Drive

    $249.99
  8. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT / 4.2L L6 GAS, 5.3L V8 GAS

    • Suspension Enhancement System
    • Weight Capacity 6000 lbs.
    • Rear

    Fitment:

    2008 CHEVROLET TRAILBLAZER

    $269.36
  9. Key Features:
    • Sway Bar Bushings Rebuild Kit
    • For PN[2272]

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE / 4.2L L6

  10. Key Features:
    • On Board Air Compressor Kit
    • Dual Needle

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $777.99
  11. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Dual Needle
    • Installation Time - 2 Hours Or Less

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT

    $590.67
  12. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE, LT / 4.2L L6 GAS, 5.3L V8 GAS

  13. KYB Jounce Bumper and Bellows are high quality products guaranteeing superior functionality and efficiency. They keep your struts protected from dirt, dust and sand. These products cause abrasive wear to the polished shaft, upper seal and bushing. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL

  14. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL / 4 Wheel Drive, All Wheel Drive, Rear Wheel Drive

  15. Key Features:
    • Sport Sway Bar
    • Rear
    • 1 1/16 in. Dia.

    Fitment:

    2008 CHEVROLET TRAILBLAZER BASE / 4.2L L6

    $331.97
  16. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL / 4 Wheel Drive, All Wheel Drive, Rear Wheel Drive / Front

  17. KYB Spring Seat Insulators are specially designed to reduce noise and vibration that worn parts can transmit into the vehicle. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL

  18. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL

  19. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET TRAILBLAZER ALL / 4 Wheel Drive, All Wheel Drive, Rear Wheel Drive

Results Per Page:

1-20 of 68 Results

1-20 of 68 Results