2008 CHEVROLET COLORADO Suspension Systems

  1. Key Features:
    • EZ-550 Helper Spring Kit
    • Up To 500 lbs. Level Load Capacity

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS

    $104.64
  2. Key Features:
    • LP-15 Helper Spring Kit
    • Up To 1500 lbs. Capacity

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS

    $307.01
  3. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET COLORADO ALL / 4 Wheel Drive, Rear Wheel Drive

  4. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET COLORADO ALL / 4 Wheel Drive, Rear Wheel Drive

  5. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET COLORADO ALL / 4 Wheel Drive, Rear Wheel Drive

  6. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    2008 CHEVROLET COLORADO ALL / Rear Wheel Drive

  7. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT

    $437.44
  8. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT

    $628.76
  9. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT

    $338.78
  10. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT

    $509.18
  11. Key Features:
    • Ride Control Kit
    • Rear
    • No Drill
    • Installation Time - 1 Hour Or Less

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 4 Wheel Drive

    $367.55
  12. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    2008 CHEVROLET COLORADO Rear Wheel Drive / Crew Cab, Extended Cab

  13. Key Features:
    • Level Lift Torsion Key
    • Front
    • Max. Lift 2.25 in.

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS

    $187.63
  14. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS

  15. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS

  16. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS / 4 Wheel Drive / With Front Torsion Bars

    $100.00
  17. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2008 CHEVROLET COLORADO LS, LT, WT / 2.9L L4 GAS, 3.7L L5 GAS / Rear Wheel Drive / With Front Coil Springs

    $105.00
  18. Key Features:
    • SX8000 Shock Absorber
    • Incl. Multi-Fit Hardware Pack
    • 2 Required

    Fitment:

    2008 CHEVROLET COLORADO 2.9L L4 GAS, 3.7L L5 GAS / 4 Wheel Drive

  19. Key Features:
    • SX8000 Shock Absorber
    • Recomm. For Use w/3.5 in. Rear Stock Blks
    • Veh. w/2 in. Stock Rear Blocks May Req.Add Lift In Rear Of Veh.
    • Incl. Multi-Fit Hdwr. Pk.
    • 2 Req.

    Fitment:

    2008 CHEVROLET COLORADO 2.9L L4 GAS, 3.7L L5 GAS / 4 Wheel Drive

  20. Key Features:
    • Torsion Key Leveling Kit
    • 2 in.
    • Incl. Driver/Passenger Side Torsion Bar Keys
    • Rear View Mirror Hanger

    Fitment:

    2008 CHEVROLET COLORADO 2.9L L4 GAS, 3.7L L5 GAS / 4 Wheel Drive

    $125.52