2005 MAZDA B4000 Suspension Systems

Results Per Page:

1-20 of 58 Results

1-20 of 58 Results
  1. Rancho RS9000X Remote Reservoir Coil-Over Shock Absorbers feature 9-position adjustable valving that enables you to fine-tune damping performance for a wide range performance situations. You can adjust damping according to the environment and your needs as you see fit both manually or remotely (from the inside of your vehicle). The Remote Coil-Over Shock absorbers are undoubtedly the most cutting-edge absorbers coming from the Rancho engineers with more than 40 years of off-roading experience. The RS9000X comes with spherical ends and specially anodized aluminum reservoir with stainless steel braided nose, as well as an aluminum threaded sleeve/spring retainers, Eibach dual coil springs and a spring slider. Take your on and off-road performance to the next level with the ultimate shock absorbers available on the market today! Do not miss the chance to become a part of the Rancho premium off-roading experience today!

    Fitment:

    2005 MAZDA B4000 4.0L V6 GAS

    $125.12
  2. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2005 MAZDA B4000 BASE, SE

    $437.44
  3. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2005 MAZDA B4000 BASE, SE

    $628.76
  4. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2005 MAZDA B4000 BASE, SE

    $338.78
  5. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2005 MAZDA B4000 BASE, SE

    $509.18
  6. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2005 MAZDA B4000 BASE, SE

    $100.00
  7. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $100.00
    • Suspension Enhancement System
    • Weight Capacity 3000 lbs.
    • Rear

    Fitment:

    2005 MAZDA B4000

    $269.36
  8. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2005 MAZDA B4000 ALL / Rear Wheel Drive

  9. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2005 MAZDA B4000 ALL / Rear Wheel Drive

  10. Key Features:
    • EZ-550 Helper Spring Kit
    • Up To 500 lbs. Level Load Capacity

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $104.64
  11. Key Features:
    • Sway Bar
    • Rear
    • 7/8 in. Bar Diameter.

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $390.71
  12. Key Features:
    • EZ-1000 Helper Spring Kit
    • Up To 1000 lbs. Load Capacity
    • Rear

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $153.54
  13. Key Features:
    • Leaf Spring Bushing Set
    • Black
    • Rear
    • Performance Polyurethane

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

  14. Key Features:
    • Leaf Spring Bushing Set
    • Red
    • Rear
    • Performance Polyurethane

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

  15. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Must Reuse All Hardware
    • Performance Polyurethane

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $100.92
  16. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Front
    • 29 MM
    • Performance Polyurethane

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    • Series: RS7MT
    • Position: Rear Driver or Passenger
    • Quantity: Sold Individually
    • Color: Black
    • Compressed Length: 16.65"
    • Extended Length: 25.70"
    • Stroke Length: 9.05"
    • Body Length: 15.67"
    • Dust Shield: No
    • Extended Bumper Stop: Yes
    • Compressed Bumper Stop: No
    • Lower Mounting: L1
    • Upper Mounting: L1
    • Extended Hydraulic Lockout: No
    • Reserve Tube Diameter: 1.97"

    Fitment:

    2005 MAZDA B4000 4.0L V6 GAS

  17. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

  18. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Must Reuse All Hardware For Upper Bushing
    • Performance Polyurethane

    Fitment:

    2005 MAZDA B4000 BASE, SE / 4.0L V6 GAS

    $100.92
Results Per Page:

1-20 of 58 Results

1-20 of 58 Results