2003 FORD RANGER Performance Parts

  1. Key Features:
    • Eliminator Single/Multi-Program Switch Chip
    • Specifically Tuned For Your Vehicle

    Fitment:

    2003 FORD RANGER 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

    $220.00
  2. Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  3. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2003 FORD RANGER EDGE, SPORT, STX, XL, XLT

    $437.44
  4. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2003 FORD RANGER EDGE, SPORT, STX, XL, XLT

    $628.76
  5. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2003 FORD RANGER EDGE, SPORT, STX, XL, XLT

    $338.78
  6. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2003 FORD RANGER EDGE, SPORT, STX, XL, XLT

    $509.18
  7. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / 4 Wheel Drive

  8. Key Features:
    • Strap Band Clamp
    • Lap Joint
    • 2.5 in.
    • Stainless Steel

    Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  9. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2003 FORD RANGER XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  10. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  11. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2003 FORD RANGER XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  12. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  13. Key Features:
    • Single System Intermediate Pipe
    • 2.25 in. Inlet
    • Requires Gasket PN[31372]

    Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / 112.0 in. Wheelbase

  14. Fabtech Performance Lift Kit Systems will add that extra clearance you need to upgrade your shy truck into a full off-road monster! This complete set of lift components provides everything you need to add clearance for bigger tires, while maintaining a factory like ride. The lift is achieved through the 1-piece ductile iron drop down steering knuckles that will attach to the high arched lower control arm Crossmembers. This way you can add clearance without having to drill or modify your factory Suspension. These kits will lift both the front and the rear of your truck. The Performance Lift Kit system Relocates the front differential with a cradle style bracket with bushings placed at the right angle. This allows you to use the factory front driveshaft without causing vibrations on AutoTrac models. Plus, the kit comes with rock-solid steel billet sway bar end links with special urethane bushings, which retains the factory front sway bar angle. Do not hesitate and lift your truck the proper way with Fabtech's high performance lift kits today!

    Fitment:

    2003 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension

    $1,489.28
  15. Fabtech Block and U-Bolt Kits are precision engineered for sheer performance and functionality. All Fabtech components, Including the Block and U-Bolt kits, are tested to outperform all other high quality Suspension components on the market. These super-duty kits are backed by a limited 90 day warranty.

    Fitment:

    2003 FORD RANGER Rear Wheel Drive

  16. Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / Center/Offset / 2.50" / 2.50"

  17. Fitment:

    2003 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / Offset/Center / 2.50" / 2.50"

    $196.77
  18. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    2003 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension

  19. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    2003 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension

  20. Key Features:
    • Magnum FLOW Pro 5R OE Replacement Air Filter
    • Panel
    • Polyurethane Frame
    • Washable And Reusable
    • Bump Seal Design
    • Rounded Open Pleats

    Fitment:

    2003 FORD RANGER 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS