2002 FORD RANGER Suspension Systems

  1. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    2002 FORD RANGER ALL / Rear Wheel Drive

  2. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    2002 FORD RANGER ALL / Rear Wheel Drive

  3. KYB MonoMax Gas Shocks and Struts are high quality products guaranteeing superior functionality and efficiency! They are available with an oversized 46mm piston and bore and higher rebound dampening. Their design provides a more stable ride with reduced roll and pitch. Free shipping to all of USA!

    Fitment:

    2002 FORD RANGER ALL, EDGE, XL, XLT / 4 Wheel Drive, Rear Wheel Drive

    $100.79
    • Suspension Enhancement System
    • Weight Capacity 3000 lbs.
    • Rear

    Fitment:

    2002 FORD RANGER 4 Wheel Drive

    $269.36
  4. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    2002 FORD RANGER EDGE, EV, SPORT, STX, XL, XLT

    $437.44
  5. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    2002 FORD RANGER EDGE, EV, SPORT, STX, XL, XLT

    $628.76
  6. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    2002 FORD RANGER EDGE, EV, SPORT, STX, XL, XLT

    $338.78
  7. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    2002 FORD RANGER EDGE, EV, SPORT, STX, XL, XLT

    $509.18
  8. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2002 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / 4 Wheel Drive

  9. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2002 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  10. Fabtech Block and U-Bolt Kits are precision engineered for sheer performance and functionality. All Fabtech components, Including the Block and U-Bolt kits, are tested to outperform all other high quality Suspension components on the market. These super-duty kits are backed by a limited 90 day warranty.

    Fitment:

    2002 FORD RANGER Rear Wheel Drive

  11. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    2002 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension, Rear Wheel Drive w/Torsion Bar Front Suspension

  12. Fabtech Performance Shock Absorbers come with a twin-tube hydraulic design and high-velocity 9-stage valving to provide superb performance and ride handling. Featuring a special closed cell foam insert to deliver upgraded dampening efficiency while reducing shock fade at greater speeds.

    Fitment:

    2002 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension

  13. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2002 FORD RANGER EV, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS, E1 BATTERY EV (EV/BEV)

  14. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    2002 FORD RANGER XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  15. Key Features:
    • ES3000 Shock Absorber

    Fitment:

    2002 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS

  16. Fabtech Performance Lift Kit Systems will add that extra clearance you need to upgrade your shy truck into a full off-road monster! This complete set of lift components provides everything you need to add clearance for bigger tires, while maintaining a factory like ride. The lift is achieved through the 1-piece ductile iron drop down steering knuckles that will attach to the high arched lower control arm Crossmembers. This way you can add clearance without having to drill or modify your factory Suspension. These kits will lift both the front and the rear of your truck. The Performance Lift Kit system Relocates the front differential with a cradle style bracket with bushings placed at the right angle. This allows you to use the factory front driveshaft without causing vibrations on AutoTrac models. Plus, the kit comes with rock-solid steel billet sway bar end links with special urethane bushings, which retains the factory front sway bar angle. Do not hesitate and lift your truck the proper way with Fabtech's high performance lift kits today!

    Fitment:

    2002 FORD RANGER Rear Wheel Drive w/Coil Spring Front Suspension

    $1,489.28
  17. Key Features:
    • Add-A-Leaf Kit
    • Long Style

    Fitment:

    2002 FORD RANGER EDGE, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / Rear Wheel Drive

  18. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2002 FORD RANGER EDGE, EV, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / 4 Wheel Drive / 4 Wheel Drive w/Torsion Bar Front Suspension

    $100.00
  19. Bilstein B6 4600 Series Shocks and Struts will take your truck, van, or SUV to new levels of handling performance, ensuring a smooth, comfortable ride mile after mile. The 4600 Series suspension parts offer unsurpassed control efficiency by utilizing Bilstein's forefront monotube gas pressure technology, developed and tested under all roads and extreme conditions. The unique piston design used in the B6 4600 Shocks Absorbers provides significantly greater sensitivity and vehicle control - designed to unleash your vehicle's true potential!

    Fitment:

    2002 FORD RANGER EDGE, EV, XL, XLT / 2.3L L4 GAS, 3.0L V6 FLEX, 3.0L V6 GAS, 4.0L V6 GAS / 4 Wheel Drive / 4 Wheel Drive w/Torsion Bar Front Suspension

    $100.00