1993 HONDA ACCORD Skunk2

Results Per Page:

1-20 of 25 Results

1-20 of 25 Results
  1. Skunk2 proudly introduces the 68mm Skunk2 Pro Series Billet Throttle Bodies, coming in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Bodies is developed for Skunk2's Pro Series Intake Manifolds, as well as OEM and numerous aftermarket intake manifolds. They are engineered to deliver direct, bolt-on horsepower and torque gains by maximizing engine airflow. Do not wait and purchase your new Pro Series Throttle Bodies by the one and only Skunk2 today!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $255.42
  2. Skunk2 Alpha Series Throttle Bodies deliver bolt-on horsepower and torque gains by delivering maximum improvements to engine airflow. Designed specifically for factory intake manifolds and Skunk2's Pro Series Intake Manifolds, the 66mm Alpha Series Throttle Bodies will not only boosts your ride's HP and TQ, but will also provide smooth drivability and OEM throttle characteristic. The Alpha Series throttle bodies feature Skunk2's all-new, fine shot-blasted surface finish and are precision die-cast from high grade materials. The bodies come with special countersunk, stainless steel mounting bolts, solid brass throttle plates, fully machined bores, and idle adjustment screws allowing for fine tuning.

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $142.14
  3. Skunk2 Adjustable Sleeve Coilovers offer one of most affordable yet aggressive suspension systems on market. This top tier coilovers are designed to allow you to fine tuning your ride's ride height, balance, and handling performance - ideal for both street and track applications. These popular coilovers are the result of Skunk2's nearly 15 years of spring technology and suspension tuning experience. The Adjustable Sleeve Coilovers kit is a very cost-effective alternative to more comprehensive coilovers like Skunk2 Pro-S II and the legendary Pro-C systems. Each kit comes with hard anodized, CNC-machined aluminum sleeves, forged spring perches, SAE 9254V racing springs, and mounting hardware. It is designed to give your ride a 3-inch drop, and is for use with OEM or aftermarket shocks. If you look for independent shock replacement, this Adjustable Sleeve Coilovers kit by Skunk2 is your best choice! Pair this system with Skunk2 Sport Shocks for maximum performance!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $273.47
  4. Skunk2 Lowering Springs are provide substantial improvements in handling efficiency and positive driver feel combined with outstanding cornering grip and reduced body roll. These superior Lowering Springs deliver light-speed cornering and stopping power - and a head-turning appearance! No more squatting under acceleration or noise-diving while braking! These outstanding springs are built of the highest grade SAE 9254V spring steel, shot-peen stress relieved and ultimately powdercoat-protected against corrosion to ensure maximum durability. Skunk2's engineering has crafted the Lowering Springs to result in a lower center of gravity and race-inspired handling, giving you the perfect balance of performance and comfortable driving experience. A truly great investment if you're looking for the best of the best in performance components developed by the one and only Skunk2!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $221.76
  5. Skunk2 crafts the Forged Lug Nuts from lightweight 7075 aluminum to deliver the ultimate combination of strength and performance. They are built following the strictest racing safety requirements - and they are ideal for high performance street applications as well. Thanks to the knurled ends design, installing the Forged Lug Nuts is a breeze! All Skunk2's valvetrain components are thoroughly tested on the dyno and the road during manufacturing. Purchase your Lug Nuts today and enjoy race-proven performance by the one and only Skunk2!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $114.56
  6. Skunk2 Billet Shift Knobs are the perfect way to add the finishing touches onto your vehicle, achieving a smoother, more positive shifting. Skunk2 developed the 5-Speed Shift Knob with all forms of racing and street applications in mind. Each 5-Speed Shift Knob is machined from billet stainless steel and comes with a PVD titanium coating capable of resisting scratching and wear. The knobs are custom weighted to 440 grams each and ideal for use with Skunk2 Short-Throw Shifters as well as with OEM applications. Purchase your 5-Speed Billet Shift Knob today and enjoy a true titanium finish knob, precision machined for your individual application - developed by the one and only Skunk2!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  7. Skunk2 Billet Oil Caps are precision CNC machined and features a fully polished finish ensuring years of worry-free functionality. Skunk2's Polished Billet Oil Caps come with a 33mm x 2.8mm thread pitch and are fully compatible with most Honda valve covers. They feature a contrasting, acid-etched Skunk2 logo, adding the ultimate finishing touch to your vehicle. Combine your brand new Skunk2 Oil Cap with a Skunk2 VTEC Solenoid Cover, Cam Seal, or Billet Wire Cover to completely finish off your engine bay!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  8. Skunk2 Billet Oil Caps are precision CNC machined and features a fully polished finish ensuring years of worry-free functionality. Skunk2's Polished Billet Oil Caps come with a 33mm x 2.8mm thread pitch and are fully compatible with most Honda valve covers. They feature a contrasting, acid-etched Skunk2 logo, adding the ultimate finishing touch to your vehicle. Combine your brand new Skunk2 Oil Cap with a Skunk2 VTEC Solenoid Cover, Cam Seal, or Billet Wire Cover to completely finish off your engine bay!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  9. Skunk2 Billet Oil Caps are precision CNC machined and features a fully polished finish ensuring years of worry-free functionality. Skunk2's Polished Billet Oil Caps come with a 33mm x 2.8mm thread pitch and are fully compatible with most Honda valve covers. They feature a contrasting, acid-etched Skunk2 logo, adding the ultimate finishing touch to your vehicle. Combine your brand new Skunk2 Oil Cap with a Skunk2 VTEC Solenoid Cover, Cam Seal, or Billet Wire Cover to completely finish off your engine bay!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  10. Skunk2 Billet Shift Knobs are the perfect way to add the finishing touches onto your vehicle, achieving a smoother, more positive shifting. Skunk2 developed the 5-Speed Shift Knob with all forms of racing and street applications in mind. Each 5-Speed Shift Knob is machined from billet stainless steel and comes with a PVD titanium coating capable of resisting scratching and wear. The knobs are custom weighted to 440 grams each and ideal for use with Skunk2 Short-Throw Shifters as well as with OEM applications. Purchase your 5-Speed Billet Shift Knob today and enjoy a true titanium finish knob, precision machined for your individual application - developed by the one and only Skunk2!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  11. Skunk2 high-pressure Radiator Caps are designed to increase internal radiator pressure and provide you with a more efficient cooling system with a higher coolant boiling point. These superior radiator caps feature a significantly higher open valve pressure than most OEM radiator caps - perfect for driving under high-load conditions on both race cars and street cars alike! Purchase your Skunk2 Radiator Cap today and put the finishing touches onto your vehicle!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  12. Skunk2 Magnetic Drain Plugs are designed to permanently remove fine metal particles from your engine's crankcase and transmission housing by attracting them with powerful magnetic construction. The Magnetic Drain Plugs are made from high-quality materials and pre-drilled for safety wire installations. Purchase your new Magnetic Drain Plugs and ensure your vehicle with the ultimate engine safeguard!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

  13. Skunk2 Sport Shocks are affordable, high-quality shocks boasting a dual-tube design with hardened, chrome-plated and super-finished shaft and ultra precision valving. These factory-replacement shocks were developed by utilizing the same technology and manufacturing processes as Skunk2's top-of-the-line coilover suspension systems. If you look for unmatched shock durability, reliability, and smooth operation at a great value, then the Skunk2 Sport Shocks are what you want. Skunk2 Sport Shocks provide optimum suspension travel on lowered vehicles - improving performance without sacrificing comfort. The Sport Shocks deliver maximum performance when combined with Skunk2 Lowering Springs or the Adjustable Sleeve Coilovers, resulting in unparalleled control, handling, balance, and overall comfort at a truly great price!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $297.73
  14. Skunk2 Sport Shocks are affordable, high-quality shocks boasting a dual-tube design with hardened, chrome-plated and super-finished shaft and ultra precision valving. These factory-replacement shocks were developed by utilizing the same technology and manufacturing processes as Skunk2's top-of-the-line coilover suspension systems. If you look for unmatched shock durability, reliability, and smooth operation at a great value, then the Skunk2 Sport Shocks are what you want. Skunk2 Sport Shocks provide optimum suspension travel on lowered vehicles - improving performance without sacrificing comfort. The Sport Shocks deliver maximum performance when combined with Skunk2 Lowering Springs or the Adjustable Sleeve Coilovers, resulting in unparalleled control, handling, balance, and overall comfort at a truly great price!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS / Coupe (2 Door)

    $298.81
  15. Skunk2 proudly introduces the 68mm Skunk2 Pro Series Billet Throttle Bodies, coming in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Bodies is developed for Skunk2's Pro Series Intake Manifolds, as well as OEM and numerous aftermarket intake manifolds. They are engineered to deliver direct, bolt-on horsepower and torque gains by maximizing engine airflow. Do not wait and purchase your new Pro Series Throttle Bodies by the one and only Skunk2 today!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $264.48
  16. Skunk2 proudly introduces the 68mm Skunk2 Pro Series Billet Throttle Bodies, coming in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Bodies is developed for Skunk2's Pro Series Intake Manifolds, as well as OEM and numerous aftermarket intake manifolds. They are engineered to deliver direct, bolt-on horsepower and torque gains by maximizing engine airflow. Do not wait and purchase your new Pro Series Throttle Bodies by the one and only Skunk2 today!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $255.42
  17. Skunk2 proudly introduces the 68mm Skunk2 Pro Series Billet Throttle Bodies, coming in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Bodies is developed for Skunk2's Pro Series Intake Manifolds, as well as OEM and numerous aftermarket intake manifolds. They are engineered to deliver direct, bolt-on horsepower and torque gains by maximizing engine airflow. Do not wait and purchase your new Pro Series Throttle Bodies by the one and only Skunk2 today!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $255.56
  18. Skunk2 proudly introduces the 68mm Skunk2 Pro Series Billet Throttle Bodies, coming in its exclusive, hard anodized finish. Skunk2's 68mm Pro Series Throttle Bodies is developed for Skunk2's Pro Series Intake Manifolds, as well as OEM and numerous aftermarket intake manifolds. They are engineered to deliver direct, bolt-on horsepower and torque gains by maximizing engine airflow. Do not wait and purchase your new Pro Series Throttle Bodies by the one and only Skunk2 today!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $264.48
  19. The Ultra Series Intake Manifold is Skunk2's next generation, high performance intake manifolds designed for all popular chassis configurations and race cars. The Ultra Series Intake Manifold is a truly outstanding multi-piece cast aluminum manifold offering the unparalleled performance only a modular design could allow. Developed in accordance with Skunk2's legendary Pro Series Intake Manifolds and utilizing state-of-the-art CFD (Computational Fluid Dynamics) software, the Ultra Series Intake Manifold is your perfect choice you're looking for best manifold out there. It comes with a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes. What's more, the Ultra Series Intake Manifold has undergone extensive in-house dyno and on-car testing, resulting in a less restrictive design, yielding both torque and power gains!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

    $367.99
  20. The Ultra Series Intake Manifold is Skunk2's next generation, high performance intake manifolds designed for all popular chassis configurations and race cars. The Ultra Series Intake Manifold is a truly outstanding multi-piece cast aluminum manifold offering the unparalleled performance only a modular design could allow. Developed in accordance with Skunk2's legendary Pro Series Intake Manifolds and utilizing state-of-the-art CFD (Computational Fluid Dynamics) software, the Ultra Series Intake Manifold is your perfect choice you're looking for best manifold out there. It comes with a three-piece modular design that allows for easy disassembly, porting, and plenum volume changes. What's more, the Ultra Series Intake Manifold has undergone extensive in-house dyno and on-car testing, resulting in a less restrictive design, yielding both torque and power gains!

    Fitment:

    1993 HONDA ACCORD 2.2L L4 GAS

Results Per Page:

1-20 of 25 Results

1-20 of 25 Results