1991 BUICK COMMERCIAL CHASSIS Brands

  1. Key Features:
    • Performer-Plus Camshaft Kit
    • Hyd.
    • Off-Idle-5500rpm
    • Adv. Dur. 244deg. Int/264deg. Exh
    • Valve Lift 0.398 Int/0.442 Exh

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $322.29
  2. Key Features:
    • Performer Series Intake Manifold
    • Cast
    • Idle-5500rpm
    • For 4 bbl Carbs
    • For Cast Iron Heads
    • EGR

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $390.14
  3. Key Features:
    • Sure Seat Valve Spring
    • High Performance Street
    • Non-Rotator
    • Seat Pressure 104-116 lbs.
    • OD 1.265 in.
    • ID 7/8 in.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

  4. Key Features:
    • Sure Seat Valve Spring
    • Non-Rotator
    • Victor Jr. Flat Tappet

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $203.04
  5. Key Features:
    • Sure Seat Valve Spring
    • High Performance Street
    • Seat Pressure 128 lbs. At 1.85 in. Installed Height
    • Open Load 338 lbs. At 1.27 in.
    • 1.46 in. OD
    • 1.038 in. ID

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $153.78
  6. Key Features:
    • Sure Seat Valve Spring
    • For Hyd Roller Cams
    • 1.800 Installed Height

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $159.81
  7. Key Features:
    • Hex-A-Just By Cloyes Adj. True-Roller Timing Chain Set
    • Incl. Cam/Crank Sprckt/Chain
    • 90 Deg.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $219.07
  8. Key Features:
    • Victor Series Circle Track Water Pump
    • -8 AN Aux Fitting
    • 90deg. To Block
    • 0.75 in. Pilot Shaft
    • Dimension From Block Surface To Hub 5.8125 in.
    • Chevy Small Block

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $363.66
  9. Key Features:
    • Victor Pro Series Circle Track Water Pump
    • -10 AN Aux Fitting
    • 90deg. To Block
    • 0.75 in. Pilot Shaft
    • Dimension From Block Surface To Hub 5.8125 in.
    • Chevy Small Block

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $353.95
  10. Key Features:
    • E-CNC 185 Cylinder Head
    • Chamber Size 64cc
    • Straight Plug
    • Single
    • Complete
    • 2.02 in. Intake/1.60 in. Exhaust Valve
    • Chevy SB
    • Springs For Hydraulic Roller

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS 5.0L V8 GAS

    $1,115.50
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Direct-Fit
    • Main Piping Diameter: 2.5"
    • Inlet Diameter: 2.5"
    • Outlet Diameter: 2.5"
    • Body Length: 12"
    • Body Width: 5"
    • Overall Length: 23"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Exhaust Pipe Material: Stainless Steel
    • Air Tube Adapter: Pre-Installed
    • O2 Sensor Location: Pre And Post Converter
    • Exhaust Component Mount Type: Uses Factory Hangers

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS / 2.50" / 2.50"

    $304.00
    • Black
    • 2 pc. Front

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS Black

    • Black
    • 2 pc. Rear
    • Does Not Cover Hump

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS Black

    $139.99
  11. Key Features:
    • Load Controller II On-Board Air Compressor Control System
    • Dual Gauge

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE

    $418.87
  12. Key Features:
    • Load Controller
    • Dual
    • Standard Duty

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE

    $480.09
  13. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  14. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  15. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

  16. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS

    $338.95
  17. B&M Automatic Transmission Filter Extensions are the perfect solution if you want to move your transmission filter into the oil in aftermarket B&M Transmission Pans. They are ideal for racing, towing, off-roading or just everyday driving in hot weather. They allow your transmission to operate at cooler temperatures for improved efficiency and durability! These B&M extensions are crafted from cast aluminum and come with all necessary mounting bolts to fit the valving body.

    Fitment:

    1991 BUICK COMMERCIAL CHASSIS BASE / 5.0L V8 GAS