1989 DODGE SHADOW Suspension Systems

Results Per Page:

1-20 of 41 Results

1-20 of 41 Results
  1. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  2. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL

  3. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL / Front Wheel Drive

  4. KYB Coil Spring Insulators are high quality products guaranteeing superior functionality and efficiency. They are specially designed to reduce the noise and vibration that worn parts can transmit from the road. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL

  5. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL / Front

  6. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Single Needle
    • Front
    • Installation Time - 1 Hour Or Less

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $437.44
  7. Key Features:
    • On Board Air Compressor Kit
    • Single Gauge/Dual Control/Dual Needle

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $628.76
  8. Key Features:
    • Load Controller
    • Single
    • Heavy Duty

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $338.78
  9. Key Features:
    • Load Controller
    • Dual
    • Heavy Duty

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $509.18
  10. Key Features:
    • Air Lift 1000 Coil Spring
    • Rear
    • No Drill
    • Installation Time - 1 Hour Or Less

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $140.79
  11. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  12. Key Features:
    • On Board Air Compressor Kit
    • Dual Needle

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $777.99
  13. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Dual Needle
    • Installation Time - 2 Hours Or Less

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby

    $590.67
  14. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL

  15. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Front
    • Bar Dia. 1 1/8 in.
    • Performance Polyurethane

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  16. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1989 DODGE SHADOW ALL

  17. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Incl. Strut Rod Bushings PN[5.7107]
    • Must Reuse All Metal Hardware
    • Performance Polyurethane

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  18. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Incl. Strut Rod Bushings PN[5.7107]
    • Must Reuse All Metal Hardware
    • Performance Polyurethane

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  19. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

  20. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1989 DODGE SHADOW BASE, ES, Shelby / 2.2L L4 GAS, 2.5L L4 GAS

Results Per Page:

1-20 of 41 Results

1-20 of 41 Results