- Free Shipping
- Best Price Guarantee
- 30 Days No-Hassle Returns
1988 CHEVROLET R10 SUBURBAN Performance Parts
-
Key Features:
- Sure Seat Valve Spring Kit
- High-Performance Street
- Non-Rotator
- Seat Pressure 104-116 lbs.
- OD 1.265 in.
- ID 7/8 in.
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$158.39 -
Key Features:
- Timing Cover Gasket And Oil Seal Kit
- Incl. Front Cover Gasket/Front Seal
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$32.78 -
Key Features:
- Hydraulic Roller Lifter
- Single Replacement
- Originally Equipped w/Hydraulic Lifters
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$53.69 -
Key Features:
- Lifter Installation Kit
- Complete
- Hydraulic
- Incl. Original Spec Lifter Guides/Hold Down Spider
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$153.08 -
Key Features:
- Ignition Wiring Harness
- Plug-In
- MSD To GM Dual Connector Coil
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$64.96 -
Skyjacker Nitro Shock Absorbers are your best choice if you're looking to improve the driving quality and handling of your ride. These high-quality shocks are perfect for all vehicles - from lifted or stock level sedans to the meanest off-road machines. What makes the Nitro Shocks unique is their highly-charged bodies - packing 150psi of nitrogen gas - and the shocks' ability to auto-adjust depending on the specific driving conditions on and off the road. The shocks will improve your vehicle's characteristics and give you the smoothest ride possible.
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel
$64.58 -
Key Features:
- Performer Centerbolt Cylinder Head
- Chamber Size 60cc
- Complete Single
- Must Use Hardened Pushrods
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$1,028.50 -
Key Features:
- Distributor Cap And Rotor Kit
- Internal Coil
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$52.81 -
Key Features:
- Crank Trigger
- 7 in. Balancer
- Replacement
- Red
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$245.95 -
Key Features:
- Rollin Thunder Hydraulic Roller Lifter Kit
- Hydraulic
- Adv Duration 296 In/300 Exh
- V. Lift 0.539 In/0.548 Exh
- Lobe Angle 112 deg
- Incl Cam PN[2204]/Lifters/Pushrods
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$984.95 -
Key Features:
- Street Fire Spark Plug Wire Set
- Low Resistance Conductor
- Black Insulation/Boots
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$61.48 -
Key Features:
- Victor Series Water Pump
- Cast Finish
- Long-Style
- Aluminum
- Reverse Rotation
- 5/8 in. Pilot Shaft
- Dimension Block Surface To Hub 6.9375 in.
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$353.95 -
Key Features:
- Crank Trigger Kit
- 7 in. Balancer
- Red
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$430.95 -
Key Features:
- Accu-Drive Camshaft Gear Drive
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$294.44 -
Key Features:
- On Board Air Compressor Kit
- Single Gauge/Dual Control/Dual Needle
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO
$628.76 -
Key Features:
- Load Controller
- Single
- Heavy Duty
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO
$338.78 -
Key Features:
- Load Controller
- Dual
- Heavy Duty
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO
$509.18 -
Key Features:
- Replacement Bellow
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO
$151.97 -
Key Features:
- Crank Trigger Kit
- 6.25 in. Balancer
- Red
Fitment:
1988 CHEVROLET R10 SUBURBAN 5.7L V8 GAS
$430.95 -
B&M Braided Transmission Fluid Dipsticks allow you to check your transmission oil with a high quality aluminum-braided transmission fluid dipstick. They feature a stylish, flexible design with an O-ring sealed cap that screws directly into the tube to prevent leaks. The base of the tube comes with a sealing grommet where it goes into the transmission.
Fitment:
1988 CHEVROLET R10 SUBURBAN SCOTTSDALE, SILVERADO / 5.7L V8 GAS, 6.2L V8 Diesel
$49.58