1988 CHEVROLET BLAZER Engine Components

  1. Key Features:
    • Sure Seat Valve Spring Kit
    • High-Performance Street
    • Non-Rotator
    • Seat Pressure 104-116 lbs.
    • OD 1.265 in.
    • ID 7/8 in.

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $158.39
  2. Key Features:
    • Timing Cover Gasket And Oil Seal Kit
    • Incl. Front Cover Gasket/Front Seal

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  3. Key Features:
    • Hydraulic Roller Lifter
    • Single Replacement
    • Originally Equipped w/Hydraulic Lifters

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  4. Key Features:
    • Lifter Installation Kit
    • Complete
    • Hydraulic
    • Incl. Original Spec Lifter Guides/Hold Down Spider

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $153.08
  5. Key Features:
    • Performer Centerbolt Cylinder Head
    • Chamber Size 60cc
    • Complete Single
    • Must Use Hardened Pushrods

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $1,028.50
  6. Key Features:
    • Rollin Thunder Hydraulic Roller Lifter Kit
    • Hydraulic
    • Adv Duration 296 In/300 Exh
    • V. Lift 0.539 In/0.548 Exh
    • Lobe Angle 112 deg
    • Incl Cam PN[2204]/Lifters/Pushrods

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $984.95
  7. Key Features:
    • Accu-Drive Camshaft Gear Drive

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $294.44
  8. Key Features:
    • Valve Cover Bolts
    • Chrome Plated
    • 1/4 in.-20 x 3 3/8 in.
    • Button Head
    • 1/4 in. AN Washers
    • 4 pc.

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  9. Key Features:
    • Ultra Seal Oil Pan Stud Kit
    • 0.25 in.-20/28 x 1 1/8 in. - 14 Studs And Nuts
    • 5/16 in.-18/24 x 1 5/16 in. - 4 Studs And Nuts

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  10. Key Features:
    • Ultra Seal Oil Pan Gasket
    • 3/16 in. Thick
    • Molded Rubber

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  11. Key Features:
    • Ultra Seal Harmonic Balancer Bolt/Washer Kit
    • 7/16 in. -20 x 2.25 in.
    • w/Split Lock Washer And Thick Ground Washer

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  12. Key Features:
    • Timing Cover Gasket Set
    • Cork

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  13. Key Features:
    • Quick-Change Timing Cover Gasket
    • Syntheseal

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  14. Key Features:
    • Ultra Seal Sure-Lock Rocker Arm Nuts
    • 3/8 in. Stud
    • For Stock Rocker Arms
    • 16 Nuts w/Socket Head Set Screws And Hex Key Wrench
    • 0.603 in. OD Shank

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  15. Key Features:
    • MLS Head Gasket
    • Multi-Layered Steel
    • 4.035 in. Gasket Bore
    • 0.040 in. Compressed Thickness
    • Sold Individually

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $108.95
  16. Key Features:
    • Timing Cover Seal
    • Made From A Blend Of Nitrile Rubber And Fiber

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  17. Key Features:
    • Street Legal Dress-Up Kit
    • Incl. Valve Covers/Gaskets/Push-In Breather/Dipstick Handle/Dist. Clamp w/Bolt/Valve Cover Clamps w/Bolts/Wire Separators/ Oil Plug
    • Chrome

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

    $119.95
  18. Key Features:
    • Cylinder Head Dowel Pins
    • 5/16x5/8 in.
    • 2 pc.

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  19. Key Features:
    • Timing Cover Bolts
    • Chrome Plated
    • Hex Head
    • Incl. Ten 1/4 in. w/Washers

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS

  20. Key Features:
    • Advance And Retard Cam Bushings
    • Incl. 0/1/3/5/7 deg. Bushings
    • Race Only

    Fitment:

    1988 CHEVROLET BLAZER 5.7L V8 GAS