1987 MERKUR XR4TI Performance Parts

Results Per Page:

20 Results

20 Results
    • OE Replacement Oil Filter
    • Style: Canister
    • Height: 5.18"
    • Outside Diameter: 3.66"
    • Filter By-Pass Relief Valve: Yes
    • Relief Valve Open: 8-11 PSI
    • Anti-Drain back Valve: Yes
    • Smallest Particle Filtered: 21 Microns
    • Gasket Outside Diameter: 2.83"
    • Gasket Inside Diameter: 2.46"
    • Gasket Thickness: 0.2"
    • Quantity: Sold as set of 12

    Fitment:

    1987 MERKUR XR4TI 2.3L L4

  1. Key Features:
    • Thermocap Radiator Cap
    • Blue
    • OEM Replacement w/Thermometer Built In
    • 16 psi

    Fitment:

    1987 MERKUR XR4TI 2.3L L4 GAS

    • Position: Front
    • Rotor Construction: Vented 1-Piece
    • Rotor Style: Dimpled & Slotted
    • Rotor Diameter: 10.2"
    • Quantity: Sold as a set

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $220.60
  2. Key Features:
    • Distributor Control Module
    • TFI Distributor
    • Solid State Electronics
    • Remote Mount

    Fitment:

    1987 MERKUR XR4TI 2.3L L4 GAS

  3. Bilstein B8 Twintube Shock Absorbers and Struts offer an economical performance upgrade to OE dampers, enhancing your vehicle's lowered suspension with Bilstein's superior gas pressure technology. The B8 dampers provide application-specific valve adjustment to help your vehicle reach its full potential. The B8 Twintube Strut Assembly is developed to deliver superior control and handling compared to conventional dampening technology. If you're looking for a sporty performance with a high level of comfort, Bilstein B8 Shocks and Struts are your ideal choice!

    Fitment:

    1987 MERKUR XR4TI BASE

    $117.42
  4. Bilstein B6 Monotube Shock Absorbers deliver serious damping power and optimum performance even under loads. If you don't want to go for an all-out Bilstein sports models, then the B6 is your perfect choice. The B6 Shocks are designed for increased power reserves and service life - ideal for both day-to-day and extreme situations. Featuring Bilstein's forefront gas pressure technology and dramatic improvement in safety and performance! Do not wait and order your B6 shocks today!

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $282.11
    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16UNF-2B

    Fitment:

    1987 MERKUR XR4TI 2.3L L4 GAS

  5. Bilstein B6 Monotube Shock Absorbers deliver serious damping power and optimum performance even under loads. If you don't want to go for an all-out Bilstein sports models, then the B6 is your perfect choice. The B6 Shocks are designed for increased power reserves and service life - ideal for both day-to-day and extreme situations. Featuring Bilstein's forefront gas pressure technology and dramatic improvement in safety and performance! Do not wait and order your B6 shocks today!

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $114.48
  6. Key Features:
    • Super Coil
    • Primary Resist 0.2 Ohms Secondary 8.8 k Ohms
    • Turn Ratio 132:1
    • Max Voltage 48000V

    Fitment:

    1987 MERKUR XR4TI 2.3L L4 GAS

    • Position: Front
    • Rotor Construction: Vented 1-Piece
    • Rotor Style: Plain
    • Rotor Diameter: 10.2"
    • Quantity: Sold as a set

    Fitment:

    1987 MERKUR XR4TI 2.3L L4

    $130.36
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2.25"
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Body Length: 9"
    • Body Width: 5.5"
    • Overall Length: 13"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: N/A

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS / 2.25" / 2.25"

    $105.00
  7. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1987 MERKUR XR4TI ALL / Rear Wheel Drive

    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16UNF-2B

    Fitment:

    1987 MERKUR XR4TI 2.3L L4 GAS

  8. Bilstein B8 Twintube Shock Absorbers and Struts offer an economical performance upgrade to OE dampers, enhancing your vehicle's lowered suspension with Bilstein's superior gas pressure technology. The B8 dampers provide application-specific valve adjustment to help your vehicle reach its full potential. The B8 Twintube Strut Assembly is developed to deliver superior control and handling compared to conventional dampening technology. If you're looking for a sporty performance with a high level of comfort, Bilstein B8 Shocks and Struts are your ideal choice!

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $280.00
  9. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1987 MERKUR XR4TI ALL / Rear Wheel Drive / Front

  10. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    1987 MERKUR XR4TI ALL

    • Series: Redstuff Pad, RK Series Rotor
    • Position: Front
    • Pad Material: Ceramic
    • FMSI: D298 Front
    • Rotor Construction: Vented 1-Piece Front
    • Rotor Style: Plain
    • Rotor Diameter: 10.2" Front

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $223.19
    • Series: Greenstuff 2000 Pad, GD Series Rotor
    • Position: Front
    • Pad Material: Organic
    • FMSI: D298 Front
    • Rotor Construction: Vented 1-Piece Front
    • Rotor Style: Dimpled & Slotted
    • Rotor Diameter: 10.2" Front

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $293.83
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Configuration: Universal
    • CARB (California) Compliant: Yes
    • CARB EO#: D-193-150
    • Air Tube Adaptable: No
    • Body Shape: Round
    • Body Length: 13.25"
    • Body Width: 4"
    • Body Height: 4"
    • Inlet Connection Type: Weld-On
    • Outlet Connection Type: Weld-On
    • Body Material: Stainless Steel
    • Quantity: Sold Individually

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS / 2.25" / 2.25"

    $560.00
    • Series: Greenstuff 2000 Pad, RK Series Rotor
    • Position: Front
    • Pad Material: Organic
    • FMSI: D298 Front
    • Rotor Construction: Vented 1-Piece Front
    • Rotor Style: Plain
    • Rotor Diameter: 10.2" Front

    Fitment:

    1987 MERKUR XR4TI BASE / 2.3L L4 GAS

    $212.60
Results Per Page:

20 Results

20 Results