1987 DODGE LANCER Brands

  1. Key Features:
    • Tie Rod Dust Boot
    • Red
    • Octagon Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS

    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3 in (76 mm)
    • Thread Specification: 3/4" - 16

    Fitment:

    1987 DODGE LANCER 2.2L L4 GAS, 2.5L L4 GAS

  2. Key Features:
    • Magnum FLOW Pro DRY S OE Replacement Air Filter
    • Polyurethane Frame
    • Washable/Reusable
    • Progressive Bump Seal Design

    Fitment:

    1987 DODGE LANCER 2.2L L4 GAS, 2.5L L4 GAS

    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2"
    • Inlet Diameter: 2"
    • Outlet Diameter: 2"
    • Body Length: 12"
    • Body Width: 5.5"
    • Overall Length: 16"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Pre-Installed
    • O2 Sensor Location: N/A

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS / 2.00" / 2.00"

    $126.00
  3. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER ALL / Front

  4. KYB Strut Boot Kits are specially designed to protect struts and cartridges from whatever the road may throw at them. These products are easy to install. Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER ALL

  5. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER ALL / Front Wheel Drive

  6. KYB Coil Spring Insulators are high quality products guaranteeing superior functionality and efficiency. They are specially designed to reduce the noise and vibration that worn parts can transmit from the road. Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER ALL

  7. Russell Performance is a leading manufacturer of hoses, hose ends, fittings, and adapters you need, and provides a wide assortment of plumbing solutions with a variety of materials and finishes. You can find all Russell products here at a great price! Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER BASE, ES

    • OE Replacement Oil Filter
    • Style: Spin-On Lube Filter
    • Class: A
    • Duty Type: LD
    • Height: 3.40"
    • Inner Diameter Top: Closed
    • Media Type: Enhanced Cellulose
    • Micron: 21 Micron
    • Outer Diameter Top: 2.92"
    • Burst Pressure: 275 PSI
    • Beta Ratio: 2/20 - 6/20
    • By-Pass Valve Setting: 8-11
    • Flow Rate: 7-9 GPM
    • Thread Size: 3/4-16 in.
    • Case Quantity: 12

    Fitment:

    1987 DODGE LANCER 2.2L L4, 2.5L L4

  8. Key Features:
    • On Board Air Compressor Kit
    • Dual Needle

    Fitment:

    1987 DODGE LANCER BASE, ES

    $777.99
  9. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Dual Needle
    • Installation Time - 2 Hours Or Less

    Fitment:

    1987 DODGE LANCER BASE, ES

    $590.67
  10. Key Features:
    • Front Left

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS

    $120.82
  11. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS

  12. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Front
    • Bar Dia. 1 1/8 in.
    • Performance Polyurethane

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS

  13. Russell Performance is a leading manufacturer of hoses, hose ends, fittings, and adapters you need, and provides a wide assortment of plumbing solutions with a variety of materials and finishes. You can find all Russell products here at a great price! Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER BASE, ES

  14. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1987 DODGE LANCER ALL

    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2.25"
    • Inlet Diameter: 2.25"
    • Outlet Diameter: 2.25"
    • Body Length: 9"
    • Body Width: 5.5"
    • Overall Length: 13"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Not Adaptable
    • O2 Sensor Location: N/A

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS / 2.25" / 2.25"

    $105.00
    • Series: Standard
    • Material: Stainless
    • Carb Compliant: No
    • Converter Configuration: Universal
    • Main Piping Diameter: 2"
    • Inlet Diameter: 2"
    • Outlet Diameter: 2"
    • Body Length: 12"
    • Body Width: 5.5"
    • Overall Length: 16"
    • Body Material: Stainless
    • Catalytic Converter Format: Pre-Catalytic Converter And Main Catalytic Converter
    • Catalytic Converter Substrate Material: Ceramic
    • Catalytic Converter Body Material: Stainless
    • Air Tube Adapter: Pre-Installed
    • O2 Sensor Location: N/A

    Fitment:

    1987 DODGE LANCER BASE, ES / 2.2L L4 GAS, 2.5L L4 GAS / 2.00" / 2.00"

    $130.00
  15. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits Early Type [Socket]/Late Type [HEI Spark Plug Top] Dist. Caps
    • Includes [4] 90 Deg. Boots/Terminals

    Fitment:

    1987 DODGE LANCER 2.2L L4 GAS, 2.5L L4 GAS

    $133.95