1984 FORD E-250 ECONOLINE Engine Components

    • OE Replacement Oil Filter
    • Style: Canister
    • Height: 5.18"
    • Outside Diameter: 3.66"
    • Filter By-Pass Relief Valve: Yes
    • Relief Valve Open: 8-11 PSI
    • Anti-Drain back Valve: Yes
    • Smallest Particle Filtered: 21 Microns
    • Gasket Outside Diameter: 2.83"
    • Gasket Inside Diameter: 2.46"
    • Gasket Thickness: 0.2"
    • Quantity: Sold as set of 12

    Fitment:

    1984 FORD E-250 ECONOLINE 4.9L L6 GAS, 4.9L L6 LPG, 5.0L V8, 5.8L V8

  1. Key Features:
    • Valve Cover Gasket Set
    • 5/16 in. Thickness
    • SBF

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

  2. Key Features:
    • Performer Series Valve Seats
    • 1.9 in.

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS

    $102.00
  3. Key Features:
    • Valve Spring Retainers
    • Street
    • Non-Rotator
    • Black-Oxide Finish
    • 16 pc.

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $106.60
  4. Key Features:
    • Cylinder Head Gasket
    • 4.1 in. Bore
    • 0.038 in. Compressed
    • 8.22cc Volume

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

  5. Key Features:
    • Timing Cover Gasket And Oil Seal Kit
    • Incl. Front Cover Gasket/Crankshaft Seal/Fuel Pump Gasket/Water Pump Gasket

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

  6. Key Features:
    • Performer RPM Camshaft Kit
    • Ford 289-302
    • Hyd.
    • 1500-6500rpm
    • Adv. Dur. 390deg. Int/300deg. Exh Valve Lift 0.496 Int/0.520 Exh
    • Req. Screw-In Studs/Guide plates

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS

    $447.77
  7. Key Features:
    • E-Street Cylinder Head
    • Small Block Ford w/1.90 in. Intake Valves

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $1,425.28
  8. Key Features:
    • Aluminum Timing Cover
    • Incl. Gaskets/Crankshaft Seal

    Fitment:

    1984 FORD E-250 ECONOLINE 5.8L V8 GAS

    $210.95
  9. Key Features:
    • Performer RPM Cylinder Head
    • Chamber Size 65cc
    • Complete w/Springs For Hydraulic Roller
    • Single
    • 68-73 Chrysler 340

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $1,009.50
  10. Key Features:
    • Pushrod
    • Hydraulic Roller Cams
    • 5/16 in. Dia.
    • 6.430 in.

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS

    $205.95
  11. Key Features:
    • Street Legal Dress-Up Kit
    • Incl. Valve Covers/Gaskets/Push-In Breather/Dipstick Handle/Dist. Clamp w/Bolt/Valve Cover Clamps w/Bolts/Wire Separators/ Oil Plug
    • Chrome

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $130.64
  12. Key Features:
    • Chrome Dress-Up Kit
    • Incl. 2 Valve Covers And Gaskets/1 Push-On Wire Looms And Dividers/Clamps/Wing Bolts/Grommets
    • Race Only

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $140.21
  13. Key Features:
    • Aluminum Valve Cover
    • Anodized Finish
    • 1.25 in. Dia. Oil Breather Holes
    • Incl. Mounting Hardware
    • Baffled
    • Pair

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $233.96
  14. Key Features:
    • Ultra Seal Performance Overhaul Gasket Kit
    • Every Ultra-Seal Gasket Needed To Build Or Completely Rebuild An Engine

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8

    $189.95
  15. Key Features:
    • Oil Pan Bolt Kit
    • 6 pc. 5/16 in.-18 x 0.75 in.
    • 18 pc. 1/4 in.-20 x 0.5 in.

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8, 5.8L V8

  16. Moroso is a recognized name in the performance industry manufacturing over four thousand products including everything from oil pans and oiling systems, to ignition wire, ignition components, valve covers, fuel system equipment, air cleaners, hard-core racing tools, chassis and suspension equipment and other. All Moroso products are manufactured from the highest quality materials, and specially created by racers for racers. Free shipping to all of USA!

    Fitment:

    1984 FORD E-250 ECONOLINE 4.9L L6, 5.0L V8, 5.8L V8

  17. Key Features:
    • MLS Head Gasket
    • Multi-Layered Steel
    • 4.030 in. Gasket Bore
    • 0.040 in. Compressed Thickness
    • Sold Individually

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS

    $103.50
  18. Key Features:
    • Cam Change Gaskets
    • Every Gasket Needed To Swap Cams w/o Having To Buy A Complete Overhaul Gasket Kit

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS

  19. Key Features:
    • Ultra Seal Sure-Lock Rocker Arm Nuts
    • 3/8 in. Stud
    • For Aluminum Rocker Arms
    • 16 Nuts w/Socket Head Set Screws And Hex Key Wrench
    • 0.540 in. OD Shank

    Fitment:

    1984 FORD E-250 ECONOLINE 5.0L V8 GAS, 5.8L V8 GAS