1983 VOLKSWAGEN RABBIT CONVERTIBLE Suspension Systems

Results Per Page:

1-20 of 33 Results

1-20 of 33 Results
  1. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  2. Key Features:
    • Control Arm Bushing Set
    • Black
    • Rear
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  3. Key Features:
    • Sway Bar Bushing Set
    • Red
    • Rear
    • Bar Dia. 21mm
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  4. KW Suspensions Variant 3 Coil Over Kits are developed for unlimited sporty individuality with optimal performance and comfort. Variant 3 comes with a carefully tuned basic setup to guarantee maximum suspension adjustment and comfortable driving behavior on all roads. The V3 Coil Overs will give you complete control of your ride's height, rebound and compression. These superior KW coil over kits have undergone extensive testing on country roads, motorways and even famous European racing tracks.

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION

    $2,454.00
  5. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

  6. KYB Jounce Bumper and Bellows are high quality products guaranteeing superior functionality and efficiency. They keep your struts protected from dirt, dust and sand. These products cause abrasive wear to the polished shaft, upper seal and bushing. Free shipping to all of USA!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE ALL

  7. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

  8. Bilstein B6 Monotube Shock Absorbers deliver serious damping power and optimum performance even under loads. If you don't want to go for an all-out Bilstein sports models, then the B6 is your perfect choice. The B6 Shocks are designed for increased power reserves and service life - ideal for both day-to-day and extreme situations. Featuring Bilstein's forefront gas pressure technology and dramatic improvement in safety and performance! Do not wait and order your B6 shocks today!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION

    $139.17
  9. Bilstein B8 Twintube Shock Absorbers and Struts offer an economical performance upgrade to OE dampers, enhancing your vehicle's lowered suspension with Bilstein's superior gas pressure technology. The B8 dampers provide application-specific valve adjustment to help your vehicle reach its full potential. The B8 Twintube Strut Assembly is developed to deliver superior control and handling compared to conventional dampening technology. If you're looking for a sporty performance with a high level of comfort, Bilstein B8 Shocks and Struts are your ideal choice!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

    $192.00
  10. The KW Suspensions Coil Over kit Variant 2 is developed for optimal performance lowering within the TUV-tested adjustment range - with race-ready handling and outstanding look! The V2 kit boasts stainless steel struts and fully corrosion-resistant components with superior functionality and durability. This is the perfect system if you look for race-ready damping settings calibrated by the one and only KW engineers. What's more, you get 16 clicks of adjustments allowing you to change driving dynamics and lowering for a firmer or more comfortable handling. Developed for: Audi New Beetle (PC/VT; 9C), all excluding Convertible.

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION

    $1,934.00
  11. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  12. Key Features:
    • Sway Bar Bushing Set
    • Red
    • Front
    • Bar Dia. 17mm
    • Incl. Sway Bar End Links/New Brackets
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  13. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

  14. KYB Strut Mount Plates are specially designed to keep your strut in place on your vehicle. These products are made of high-strength steel and install to your existing OEM holes and allow the strut to pass through the center of the bearing for top mounting. Free shipping to all of USA!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE ALL / Front Wheel Drive

  15. Bilstein B4 OE Replacement series provide both monotube and twin-tube shock and struts for OEM quality and ride stability at a great price! The B4 delivers original equipment components for adjusting your ride's height for dramatically enhanced handling and driving comfort. Each Twintube Shock Absorber (B4) is constructed from high quality materials and inspired by Bilstein's legendary reputation as a trusted supplier of the world's finest vehicle manufacturers.

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  16. Bilstein B4 Twintube Strut Insert is part of Bilstein's forefront B4 replacement equipment components, offering a highly economical choice for maintaining OE ride performance. Bilstein develops both monotube and twintube shock and strut technology, providing its world-famous durability and precise construction at a great price!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  17. The KW Suspensions Coil Over Kit Variant 1 will give you more driving pleasure with a great looking, custom-adjustable lowering in the TUV-tested range. This entry level coil over kit features high-quality finish and stainless steel struts to guarantee superior functionality and corrosion resistance. The V1 comes factory pre-set for race-ready performance - developed to satisfy the sporty driver with its optimal basic setup. Get the V1 kit and enjoy maximum micro-adjustment of your vehicle's height at each wheel and each KW Coil Over Shock!

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION

    $1,394.00
  18. Key Features:
    • Control Arm Bushing Set
    • Red
    • Rear
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  19. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Front
    • Bar Dia. 17mm
    • Incl. Sway Bar End Links/New Brackets
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

  20. Key Features:
    • Sway Bar Bushing Set
    • Black
    • Rear
    • Bar Dia. 21mm
    • Performance Polyurethane

    Fitment:

    1983 VOLKSWAGEN RABBIT CONVERTIBLE BASE, WOLFSBURG EDITION / 1.7L L4 GAS

Results Per Page:

1-20 of 33 Results

1-20 of 33 Results