1979 OLDSMOBILE CUTLASS SUPREME Suspension Systems

  1. Key Features:
    • Trailing Arm Hardware Kit
    • Rear

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

    • Coil Springs
    • Set Of 2
    • Front

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

    $232.53
  2. Key Features:
    • Trailing Arm Rebuild Kit
    • For PN[1301/1301R]

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

  3. Key Features:
    • Trailing Arm Mount Brace

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

    $181.32
  4. Key Features:
    • 1.5 Street Performance Shock
    • Single Mono Tube
    • Aluminum
    • OE Replacement
    • RWD
    • Front w/0 in. Lift/Drop

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

    $161.12
  5. Key Features:
    • Tubular A-Arm
    • Upper
    • Pair
    • Geometry Corrected Design
    • 1.25in. Tubular Steel
    • 6 Deg. Of Caster
    • 1-3 Deg. Of Camber
    • Front Upper

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

    $759.24
  6. Key Features:
    • Coil Spring Rebuild Kit
    • For PN[1201/1201A]

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME Brougham / 5.7L V8

  7. Key Features:
    • On Board Air Compressor Kit
    • Dual Needle

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham

    $777.99
  8. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Dual Needle
    • Installation Time - 2 Hours Or Less

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham

    $590.67
  9. Key Features:
    • Control Arm Bushing Set
    • Black
    • Front Lower
    • Performance Polyurethane

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  10. Key Features:
    • Control Arm Bushing Set
    • Red
    • Front Lower
    • Performance Polyurethane

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  11. Key Features:
    • Adjust-A-Link End Link Set
    • Black
    • Range
    • 4 5/8in. To 5 1/8in.

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  12. Key Features:
    • Control Arm Bump Stop Set
    • Black
    • Front
    • Pull Thru Style
    • H-1.25 in.
    • L-1.5 in.
    • W-1 9/16 in.
    • Incl. 2 Per Set
    • Performance Polyurethane

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  13. Key Features:
    • Control Arm Bump Stop Set
    • Red
    • Front
    • Pull Thru Style
    • H-1.25 in.
    • L-1.5 in.
    • W-1 9/16 in.
    • Incl. 2 Per Set
    • Performance Polyurethane

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  14. Key Features:
    • Tie Rod Dust Boot
    • Black
    • Round Style
    • Largest Dia. Taper 0.59 in./15mm
    • Socket Top Dia. 1 3/8 in./35mm
    • 2 Pack

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  15. Key Features:
    • Ball Joint Dust Boot Set
    • Red
    • Front
    • Performance Polyurethane
    • Incl. 2 Upper/Lower Ball Joint Boots

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

  16. Key Features:
    • Tubular Sway Bar
    • Rear
    • 1 in. Bar Diameter.

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

    $435.32
  17. Bilstein B6 Monotube Shock Absorbers deliver serious damping power and optimum performance even under loads. If you don't want to go for an all-out Bilstein sports models, then the B6 is your perfect choice. The B6 Shocks are designed for increased power reserves and service life - ideal for both day-to-day and extreme situations. Featuring Bilstein's forefront gas pressure technology and dramatic improvement in safety and performance! Do not wait and order your B6 shocks today!

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

    $104.71
  18. Bilstein AK Series gas pressure shocks and struts are developed primarily for Pure stock, Enduro, Street Stock (stock mount), and Mini-Stock applications. The monotube construction and steel body make these shocks the ideal choice for racers who want to keep the original suspension configuration. The package comes with all of the components required for fine-tuning your vehicle - high-quality 7 AK Series shocks, detailed instructions, and recommended set-ups. The AK Series Shocks Absorbers are for use on Camaro, Chevelle, Monte Carlo, Buick Regal, full-size Ford, and Mustang bodies.

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME BASE, Brougham / 3.8L V6 GAS, 4.3L V8 Diesel, 4.3L V8 GAS, 5.0L V8 GAS, 5.7L V8 Diesel, 5.7L V8 GAS

    $101.36
  19. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1979 OLDSMOBILE CUTLASS SUPREME ALL / Rear Wheel Drive