1975 TOYOTA MARK II Performance Parts

Results Per Page:

1-20 of 24 Results

1-20 of 24 Results
    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16UNF-2B

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

  1. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II ALL

    • OE Replacement Oil Filter
    • Style: Canister
    • Height: 5.18"
    • Outside Diameter: 3.66"
    • Filter By-Pass Relief Valve: Yes
    • Relief Valve Open: 8-11 PSI
    • Anti-Drain back Valve: Yes
    • Smallest Particle Filtered: 21 Microns
    • Gasket Outside Diameter: 2.83"
    • Gasket Inside Diameter: 2.46"
    • Gasket Thickness: 0.2"
    • Quantity: Sold as set of 12

    Fitment:

    1975 TOYOTA MARK II 2.6L L6

    • Magnetic Oil Drain Plug
    • Color: Black
    • Material: Aluminum
    • Thread Size: M25 x 1.5

    Fitment:

    1975 TOYOTA MARK II

    • Product Style: Oil Filters
    • Style: Canister
    • Anti-Drain Back Valve: Yes
    • Bypass Valve: Yes
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Outside Diameter: 3.656 in (93 mm)
    • Thread Specification: 3/4" - 16UNF-2B

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

    • UPC: 805890537175
    • Product Line: StopTech Street Performance Brake Pads
    • Quantity: Sold as a set.
    • For Use with Stock Calipers: Yes
    • For Use with Stock Rotors: Yes
    • For Use with Slotted Rotors: Yes
    • For Use with Cross-Drilled Rotors: Yes
    • FMSI Reference Number: D57/D114/D161/D173/D238/D244/D246
    • Intended for Street Use: Yes
    • Brake Pad Material: Aramid-fiber metallic
    • Friction Material Type: Para-aramid metallic
    • Brake Pad Construction: Integrally molded without shims
    • Electronic Wear Sensor: No
    • Hardware Included: No

    Fitment:

    1975 TOYOTA MARK II BASE / 2.6L L6 GAS

  2. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II ALL

  3. Key Features:
    • Electric Fuel Pump
    • For Use w/Carburetor
    • Import
    • 2-3.5 psi
    • 42 gph
    • This Is Not An OEM Replacement Part

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

  4. Key Features:
    • Super Stock Breakerless Ignition Coil
    • Primary Resist 0.7 Ohms Secondary 10.8 k Ohms
    • Turn Ratio 113:1
    • Max Voltage 45000V
    • Chrome

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

  5. KYB Excel-G Gas Shocks and Struts are available with sintered-iron pistons and guide rods for strength, hard-chrome piston rods for superior durability, and seamless cylinders and eyerings. These products have a patented check valve to minimize foaming and aeration and maintain control under tough conditions. Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II ALL / Station Wagon

  6. Fitment:

    1975 TOYOTA MARK II 2.6L L6

  7. KYB Gas-a-Just Shocks and Struts use higher gas pressure to keep your tires glued to the road. Their monotube configuration eliminates aeration and foaming, their micro-smooth, hard-chromed pistons extend their life, and their seamless cylinders and eyerings completely eliminate seam failures. Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II ALL / Station Wagon

  8. Key Features:
    • Iridium Tip Spark Plug
    • 4 Pack
    • Plug Type 11IR5Y
    • [Available While Supplies Last]

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

    • Position: Rear

    Fitment:

    1975 TOYOTA MARK II ALL / Sedan (4 Door)

    • Position: Front
    • Pad Material: Semi-Metallic
    • Quantity: Sold as a set

    Fitment:

    1975 TOYOTA MARK II BASE / 2.6L L6 GAS

  9. Wix Filters Oil Filters are created to protect the engine from premature wear by removing the abrasive contaminants in the engine lubricating system. They are manufactured of pleated paper which arrests various types of suspended materials. Wix Filters patented the first spin-on oil filter in 1954 and has been a leading name in oil filter technology ever since. Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II 2.6L L6

  10. Key Features:
    • StopTech Street Brake Pads

    Fitment:

    1975 TOYOTA MARK II BASE / 2.6L L6 GAS

  11. Key Features:
    • w/Hardware

    Fitment:

    1975 TOYOTA MARK II BASE / 2.6L L6 GAS

  12. Mallory Canister Style Ignition Coils are available with an oil-filled design and an arc-resistant alkyd top for superior efficiency, insulation, and cooling. These products are offered for several different distributor types Free shipping to all of USA!

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

    • Super Stock Breakerless Ignition Coil
    • Primary Resist 0.7 Ohms
    • Secondary 10.8 k Ohms
    • Turn Ratio 113:1
    • Max Voltage 45000V
    • Yellow

    Fitment:

    1975 TOYOTA MARK II 2.6L L6 GAS

Results Per Page:

1-20 of 24 Results

1-20 of 24 Results