1969 CHEVROLET EL CAMINO Brands

Results Per Page:

361-380 of 2616 Results

361-380 of 2616 Results
  1. Key Features:
    • Victor Series Water Pump
    • Cast Finish
    • Short-Style
    • Standard Rotation
    • 5/8 in. Pilot Shaft
    • 5.625 in. From Block Surface To Hub
    • Aluminum

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $323.95
  2. Key Features:
    • Rollin Thunder Hydraulic Roller Camshaft Kit
    • Incl. Camshaft PN[2208]/Hydraulic Roller Lifters/Pushrods

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $1,517.95
  3. Key Features:
    • Rollin Thunder Hydraulic Roller Lifter Kit
    • Hydraulic
    • Adv. Duration 280 In/290 Exh
    • V. Lift 0.462 In/0.479 Exh
    • Lobe Angle 107 deg.
    • Incl. Cam PN[2209]/Lifters/Pushrods

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $1,065.95
  4. Key Features:
    • Performer Air-Gap Series Intake Manifold
    • Polished Finish
    • 55-86 Chevy Small Block 262-400 cid
    • For 4 bbl Carbs
    • Non-EGR
    • Idle-5500rpm

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $674.95
  5. Key Features:
    • Performer EPS Intake Manifold
    • Black
    • Non-EGR
    • Idle-5500rpm
    • w/Oil Fill Tube/Breather

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $445.95
  6. Key Features:
    • Intake Manifold Gasket Set
    • Port 1.28x2.09 in.
    • 0.060 in. Thickness
    • 10 pc.

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $244.95
  7. Key Features:
    • RPM Air Gap Intake Manifold
    • Polished Finish
    • Non-EGR
    • 1500-6500rpm
    • 4 bbl Carbs
    • For Square-Bore Carbs
    • Street/Hi Perf. Use Only

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $713.95
  8. Key Features:
    • RPM Air Gap Intake Manifold
    • Non-EGR
    • 1500-6500rpm
    • For 4 bbl Carbs
    • Race Use Only
    • Black

    Fitment:

    1969 CHEVROLET EL CAMINO 6.5L V8 GAS

    $588.95
  9. Key Features:
    • Victor Series Water Pump
    • Short Style
    • Standard Rotation
    • Small Block Chevy
    • Black Powder Coated Finish

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $381.50
  10. Key Features:
    • Hydraulic Roller Lifter Kit
    • Retro Fit
    • 16 pc.

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $959.95
  11. Key Features:
    • Valve Cover
    • Black Finish
    • w/Oil Fill Hole
    • Classic
    • 3.5 in. Height
    • Pair

    Fitment:

    1969 CHEVROLET EL CAMINO 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS

    $376.03
  12. Key Features:
    • Performer Series Carb
    • 600cfm
    • Sq Flange
    • Manual Choke
    • w/o EGR
    • Black Finish
    • Incl. Timed And Full Vacuum Ports/Metering Jets/Metering Rods/Step Up Spring

    Fitment:

    1969 CHEVROLET EL CAMINO 5.3L V8 GAS, 5.7L V8 GAS

    $492.95
  13. Key Features:
    • Performer RPM Cylinder Head
    • Chamber Size 64cc
    • Complete
    • Single
    • Angled Plugs
    • Chevy 302/327/350/400
    • Must Use Hardened Pushrods

    Fitment:

    1969 CHEVROLET EL CAMINO 5.3L V8 GAS, 5.7L V8 GAS

    $1,028.50
  14. Key Features:
    • On Board Air Compressor Kit
    • Dual Needle

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss

    $777.99
  15. Key Features:
    • Load Controller I On-Board Air Compressor Control System
    • Dual Needle
    • Installation Time - 2 Hours Or Less

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss

    $590.67
  16. B&M Vacuum Modulators will help you to perfectly calibrate your shift points withing a range of 2-4 mph. They are crafted in gold cadmium finish and an O-ring seal to avoid leaks. Available with pre-adjusted shift points for your convenience.

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss / 3.8L L6 GAS, 4.1L L6 GAS, 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS, 6.5L V8 GAS

  17. B&M Governor Recalibration Kit allows you to easily recalibrate the shift points of your transmission after you install it. The readjustment is possible through the governor cover located on the side of your transmission and takes no longer than a couple of minutes. This kit is ideal for effortless transmission swaps on lightweight vehicles and vehicles with low rear gear cargo. It comes packaged with an O-ring, a gasket, weights, springs and all other required hardware. Please keep in mind that this kit is not legal for use on emission controlled vehicles.

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss / 3.8L L6 GAS, 4.1L L6 GAS, 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS, 6.5L V8 GAS

    $102.95
  18. B&M Automatic Transmission Filter Extensions are the perfect solution if you want to move your transmission filter into the oil in aftermarket B&M Transmission Pans. They are ideal for racing, towing, off-roading or just everyday driving in hot weather. They allow your transmission to operate at cooler temperatures for improved efficiency and durability! These B&M extensions are crafted from cast aluminum and come with all necessary mounting bolts to fit the valving body.

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss / 3.8L L6 GAS, 4.1L L6 GAS, 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS, 6.5L V8 GAS

  19. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss / 3.8L L6 GAS, 4.1L L6 GAS, 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS, 6.5L V8 GAS

    $358.95
  20. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1969 CHEVROLET EL CAMINO BASE, CUSTOM, Ss / 3.8L L6 GAS, 4.1L L6 GAS, 5.0L V8 GAS, 5.3L V8 GAS, 5.7L V8 GAS, 6.5L V8 GAS

    $699.95
Results Per Page:

361-380 of 2616 Results

361-380 of 2616 Results