1966 CADILLAC CALAIS B&m

Results Per Page:

1-20 of 30 Results

1-20 of 30 Results
  1. B&M Braided Transmission Fluid Dipsticks allow you to check your transmission oil with a high quality aluminum-braided transmission fluid dipstick. They feature a stylish, flexible design with an O-ring sealed cap that screws directly into the tube to prevent leaks. The base of the tube comes with a sealing grommet where it goes into the transmission.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  2. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  3. Do you look for a quick and affordable solution to improve the performance of your automatic transmission? The B&M Transpak kits are the perfect answer as they will allow you to easily calibrate your shift feel to be firmer, reduce slippage and shift overlap. The Transpak will also significantly reduce overall wear and comes with everything you need to calibrate your transmission for a firmer feel. These kits will allow you to retain full automatic features when in "Drive". Plus, it is backed by a 1 year limited warranty to guarantee your investment!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $128.95
  4. B&M Flexplates are designed to withstand the extra stress of 6,000+ RPM and heavy-duty applications. These added strength flexplates come with precision-stamped centers in combination with a rust resistant gold irradiate finish for outstanding durability. The B&M Flexplates are SFI-approved and are NHRA/IHRA-legal for all classes. Plus, they are backed by a 1 Year Limited Warranty to protect your investment!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $149.95
  5. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $102.95
  6. Do you look for a quick and affordable solution to improve the performance of your automatic transmission? The B&M Transpak kits are the perfect answer as they will allow you to easily calibrate your shift feel to be firmer, reduce slippage and shift overlap. The Transpak will also significantly reduce overall wear and comes with everything you need to calibrate your transmission for a firmer feel. These kits will allow you to retain full automatic features when in "Drive". Plus, it is backed by a 1 year limited warranty to guarantee your investment!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $389.95
  7. B&M Shift Improver Kits offer you a quick and affordable way to improve the performance on any stock automatic transmission. The kits eliminate shift overlap and excess wear on clutches and band. You will be able to chose between two stages to fit your individual needs: an RV/Towing stage and a Street/Strip stage.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  8. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $358.95
  9. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $699.95
  10. B&M Vacuum Modulators will help you to perfectly calibrate your shift points withing a range of 2-4 mph. They are crafted in gold cadmium finish and an O-ring seal to avoid leaks. Available with pre-adjusted shift points for your convenience.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  11. B&M Governor Recalibration Kit allows you to easily recalibrate the shift points of your transmission after you install it. The readjustment is possible through the governor cover located on the side of your transmission and takes no longer than a couple of minutes. This kit is ideal for effortless transmission swaps on lightweight vehicles and vehicles with low rear gear cargo. It comes packaged with an O-ring, a gasket, weights, springs and all other required hardware. Please keep in mind that this kit is not legal for use on emission controlled vehicles.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $102.95
  12. B&M Automatic Transmission Intermediate Sprags completely eliminate sprag failure in result of excessive torque input. They are designed to improve your torque capacity by 100% over stock, thanks to the increased elements which are built into the unit. No more annoying sprag failures – get these B&M sprags today!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  13. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $266.95
  14. If you look for performance torque converters at a great value, you should really consider these best-selling B&M Tork Master 2000 Converters. They are an excellent choice when it comes to all-around performance converters coming with fully balanced, pressure tested pump drive tubes – which are also a breeze to install! Please note that the Tork Master 2000 Torque Converters are not suitable for big block and supercharged applications.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $327.95
  15. B&M Holeshot Torque Converters were developed to boost the launch power of your engine at a higher RPM. These advanced torque converters will allow you to upgrade your street beast by directly improving acceleration and drivetrain strength. Featuring a furnace brazed turbine, new turbine hub, extra-strength needle type thrust bearings and dual pattern drive lugs on some GM Holeshots!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $686.95
  16. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $512.95
  17. B&M Nitrous Holeshot Torque Converters are the ultimate street performance converters engineered for mild to serious performance applications. They allow your engine to launch the vehicle at higher RPM, where more power and torque are available. This results in significantly increased acceleration from dead stop, with a higher stall speed. These high quality B&M Nitrous Holeshot torque converters can withstand up to 650 HP delivered from nitrous! They are available with furnace brazed needle-bearing thrust packages and all-new turbine hubs. Backed by a 1 Year Limited Warranty to guarantee your investment!

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $696.95
  18. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  19. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

  20. B&M Automatic Transmission Deep Pans provide the perfect solution when upgrading your transmission or replacing your stock pan. These pans will help you to improve your fluid capacity and dissipate heat build-ups. The pans are available in chrome or cast aluminum finish. They are ideal for racing, towing, off-roading and even everyday driving in hot weather as they keep your transmission optimally cool. No modifications are needed to the dipstick with the B&M Deep Pans. Plus, they come packaged with a special drain plug to provide fast and clean fluid changes.

    Fitment:

    1966 CADILLAC CALAIS BASE / 7.0L V8 GAS

    $225.95
Results Per Page:

1-20 of 30 Results

1-20 of 30 Results