1965 DODGE D100 Performance Parts

Results Per Page:

1-20 of 120 Results

1-20 of 120 Results
    • Differential Bearing Kit
    • 8.75 in. 12 Bolt
    • Rear
    • Incl. Timken Carrier Bearings/Races
    • Pinion Bearings/Races/Pinion Seal/Crush Sleeve/Oil/Rear
    • 41 Case Housing
    • Four Pinion
    • Ring Gear Bolts: 12
    • Axle Shaft Spline Quantity: 30
    • Pinion Spline Count: 29
    • Ring Gear Rotation: Standard
    • Cover Gasket Included: No
    • Pinion Shims Included: No
    • Carrier Shims Included: No
    • Crush Sleeve Included: No
    • Pinion Seal Included: Yes
    • Pinion Nut Included: No
    • Ring Gear Bolts Included: No
    • Head Bearing Included: Yes
    • Tail Bearing Included: Yes
    • Carrier Bearings Included: Yes
    • Axle Seals Included: No
    • Axle Bearings Included: No
    • Quantity: Sold as a kit

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $312.38
    • Differential Bearing Kit
    • 8.75 in. 12 Bolt
    • Rear
    • Incl. Timken Carrier Bearings/Races
    • Pinion Bearings/Races/Pinion Seal/Crush Sleeve/Oil/Rear
    • 89 Case Housing
    • Four Pinion
    • Ring Gear Bolts: 12
    • Pinion Spline Count: 29
    • Ring Gear Rotation: Standard
    • Cover Gasket Included: Yes
    • Pinion Shims Included: No
    • Carrier Shims Included: No
    • Crush Sleeve Included: Yes
    • Pinion Seal Included: Yes
    • Pinion Nut Included: Yes
    • Ring Gear Bolts Included: No
    • Head Bearing Included: Yes
    • Tail Bearing Included: Yes
    • Carrier Bearings Included: Yes
    • Axle Seals Included: No
    • Axle Bearings Included: No
    • Quantity: Sold as a kit

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $278.38
    • Ring And Pinion Gear Set
    • 8.75 in. Ring Gear
    • Rear
    • 3.73 Ratio
    • w/741 Case Housing
    • 29 Spline Pinion
    • 1.375 in. Diameter Pinion Bearing Journal

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $432.89
    • Ring And Pinion Gear Set
    • 8.75 in. 12 Bolt
    • Rear
    • 42 Housing
    • 3.73 Ratio

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $563.89
    • Ring And Pinion Gear Set
    • 8.75 in. Ring Gear
    • Rear
    • 3.90 Ratio
    • w/742 Case Housing
    • 10 Spline Pinion
    • 1.750 in. Diameter Pinion Bearing Journal

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $581.89
    • Ring And Pinion Gear Set
    • 8.75 in. 12 Bolt
    • Rear
    • 89 Housing
    • 3.23 Ratio

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $405.89
    • Ring And Pinion Gear Set
    • 8.75 in. 12 Bolt
    • Rear
    • 89 Housing
    • 4.11 Ratio

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $467.89
    • Ring And Pinion Gear Set
    • 8.75 in. 12 Bolt
    • 41 Housing
    • 3.55 Ratio

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $432.89
  1. Key Features:
    • Universal Spark Plug Wire Set
    • Red Super Conductor 8.5mm
    • 8.5mm
    • Fits 8 Cyl. Early Type [Socket]/Late [HEI] Caps
    • Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

    $153.95
  2. Key Features:
    • Blaster 2 Ignition Coil
    • High Performance
    • Red

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

  3. Rancho RS9000X Remote Reservoir Coil-Over Shock Absorbers feature 9-position adjustable valving that enables you to fine-tune damping performance for a wide range performance situations. You can adjust damping according to the environment and your needs as you see fit both manually or remotely (from the inside of your vehicle). The Remote Coil-Over Shock absorbers are undoubtedly the most cutting-edge absorbers coming from the Rancho engineers with more than 40 years of off-roading experience. The RS9000X comes with spherical ends and specially anodized aluminum reservoir with stainless steel braided nose, as well as an aluminum threaded sleeve/spring retainers, Eibach dual coil springs and a spring slider. Take your on and off-road performance to the next level with the ultimate shock absorbers available on the market today! Do not miss the chance to become a part of the Rancho premium off-roading experience today!

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

    $125.12
  4. Key Features:
    • Performer RPM Cylinder Head
    • Chamber Size 63cc
    • Bare
    • Single
    • 67-85 Chrysler 318/340/360

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

    $743.50
  5. Key Features:
    • Performer RPM Cylinder Head
    • Chamber Size 63cc
    • Complete
    • Single
    • 67-85 Chrysler 318/340/360

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

    $973.50
  6. Rancho Lev-A-Load Adjustable Leaf Bracket Kits are developed with unique bracket design that allows you to install your new steering stabilizer without having to modify your vehicle. The Lev-A-Load kits are intelligently tailored to your specific application and Include all necessary hardware parts. All Included brackets are crafted only from high quality steel to ensure extended durability. Another convenient feature of the Lev-A-Load is adjustable outermost U-bolts, which will help you to tune the height and spring rate.

    Fitment:

    1965 DODGE D100 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

  7. Key Features:
    • ES9000 Shock Absorber

    Fitment:

    1965 DODGE D100 BASE / 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

  8. B&M Transmission Brackets and Levers will help you to replace all of your missing or damaged shifter components. These shifter brackets are made only from quality materials and are compatible with a wide range of applications for a perfect fit.

    Fitment:

    1965 DODGE D100 BASE / 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

  9. Key Features:
    • Steering Shock
    • Cylinder Only

    Fitment:

    1965 DODGE D100 BASE / 2.8L L6 GAS, 3.7L L6 GAS, 5.2L V8 GAS

  10. Key Features:
    • Oil Dipstick And Tube
    • Chrome Plated

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

  11. Key Features:
    • High Performance Thermostat
    • 180 deg.
    • Race Only

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

  12. Key Features:
    • Intake Manifold Bolts
    • Socket Head
    • 3/8 in.-16 x 1 in.
    • 12 ea. w/Washers

    Fitment:

    1965 DODGE D100 5.2L V8 GAS

Results Per Page:

1-20 of 120 Results

1-20 of 120 Results