1944 FORD 1/2 TON PICKUP Performance Parts

Results Per Page:

16 Results

16 Results
  1. Key Features:
    • Cylinder Head Gasket Set
    • Incl. Intake/Exhaust/Head/Waterneck/Distributor/Valve Cover Gaskets

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $188.42
  2. Key Features:
    • Ford Flathead Cylinder Head
    • 24 Stud
    • Chamber Size 65cc
    • Script Logo
    • Pair

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $858.50
  3. Key Features:
    • Ford Flathead Cylinder Head
    • 24 Stud
    • Chamber Size 65cc
    • Block Letter Logo
    • Pair

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $858.50
  4. Key Features:
    • Cylinder Head Gasket
    • 3.187 in. Bore

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $248.95
  5. Key Features:
    • Intake Manifold Gasket Set
    • Port 1.35x2. in.
    • 0.062 in. Thickness

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

  6. Key Features:
    • Ford Flathead Slingshot Intake Manifold
    • 38-48
    • New Reproduction
    • Accepts Stromberg/Holly/Demon 3 Bolt Carbs

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $669.95
  7. Key Features:
    • Intake Manifold Gasket
    • Slingshot Manifold Gasket
    • For Use w/Ford/Mercury Flat Head

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    • Material: Aluminum

    Fitment:

    1944 FORD 1/2 TON PICKUP

    $461.95
    • Water Neck Style: 75 degree
    • Swivel: No
    • Sealing Style: O-ring
    • Water Neck Material: Aluminum
    • Water Neck Finish: Black
    • Outlet Size: 1 1/2 in.
    • Thermostat Included: No
    • Mounting Hardware Included: Yes
    • Heater Bypass Provision: Yes
    • Quantity: Sold individually

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    • Crank Trigger Kit
    • 6.562 in. Diameter
    • Billet Aluminum Trigger Wheel
    • Red

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS

    $461.95
  8. Key Features:
    • Head Stud Kit Ford Flathead Edelbrock Head 1938-48

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $698.95
    • Filter Adapter Style: Right angle adapter
    • Nipple Thread Size: 3/4 in.-16
    • Oil Filter Adapter Inlet Size: 3/4 in. -16
    • Oil Filter Adapter Outlet Size: 22mm x 1.5
    • Fittings Included: No
    • Hoses Included: No
    • Hardware Included: No
    • Thermostatic Control: No
    • Adapter Material: Billet Aluminum
    • Adapter Finish: Blue anodized
    • Oil Filter Included: No
    • Quantity: Sold individually

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $167.54
    • Fastener Style: Bolt
    • Thread Size: 7/16 in.-20
    • Undercut Stud: No
    • Head Style: Hex
    • Fastener Material: Chromoly
    • Fastener Color: Black oxide
    • Washers Included: Yes
    • Washer Style: Flat
    • Quantity: Sold as a kit

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $115.00
  9. Mallory Point Distributors incorporate features not found in conventional, remanufactured, or replacement distributors, with the added benefit of stabilized contact point sets that increase coil output by 50%. They have adjustable mechanical and/or vacuum advance, heavy-duty points for an increased rpm range, self-lubricating bushings, and Mallory's Super-Duty cap and rotor with brass terminals. Free shipping to all of USA!

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $430.95
  10. Key Features:
    • Head Stud Kit Ford Flathead Edelbrock Heads 1949-53 (154-4102)

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $725.95
    • Generator Bracket Stud Kit

    Fitment:

    1944 FORD 1/2 TON PICKUP 3.6L V8 GAS, 3.9L V8 GAS

    $141.95
Results Per Page:

16 Results

16 Results